New Holland TN75 Utility tractor Specs & Features

Contents show

New Holland TN75 Utility tractor Technical Specifications

New Holland TN75 is a Row-Crop tractor that was produced by the John Deere between 1999 – 2003.

Below you will find detailed technical specifications for New Holland TN75 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

New Holland TN75 Production

Manufacturer:
Manufacturer:	New Holland
Type:	Utility tractor
Factory:	Jesi, Italy

New Holland TN75 Power

Engine:
Engine (gross):	75 hp 55.9 kW
Engine (net):	72 hp 53.7 kW
PTO (claimed):	62 hp 46.2 kW
PTO (tested):	63.9 hp 47.7 kW

New Holland TN75 Electrical

Ground:	negative
Charging system:	alternator
ROPS Charging amps:	45
Cab Charging amps:	65
Battery CCA:	730
Battery volts:	12

New Holland TN75 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Final drives:

planetary

Steering:

power

Brakes:

differential hydraulic wet disc

Cab:

Two-post folding ROPS. Cab optional.

Transmissions:

8-speed gear

8-speed partially synchronized

16-speed partially synchronized

32-speed two-speed power shift

Capacity

Fuel:	17.3 gal 65.5 L
Hydraulic system:	11.1 gal 42.0 L

Hydraulics

Type:	open center
Capacity:	11.1 gal 42.0 L
Pressure:	2755 psi 190.0 bar
Valves:	2 to 3
Pump flow:	16.9 gpm 64.0 lpm
Steering flow:	7.2 gpm 27.3 lpm
	9.2 gpm 34.8 lpm *With power shuttle transmission option.

Tracktor Hitch

Rear Type:	II
Rear lift (at 24″/610mm):	3962 lbs 1797 kg

Power Take-off (PTO)

Rear PTO:	independent
Clutch:	dry disc
Rear RPM:	540 (1.375)

New Holland TN75 Engine detail

Engine Detail
Iveco
turbocharged diesel
3-cylinder
liquid-cooled
Displacement:	179 ci 2.9 L
Bore/Stroke:	4.094×4.528 inches 104 x 115 mm
Emissions:	Tier 2
Power:	72 hp 53.7 kW
Power (gross):	75 hp 55.9 kW
Fuel use:	3.94 gal/hour 14.9 l/hour
Air cleaner:	dual paper elements
Compression:	16.5:1
Rated RPM:	2300
Torque:	220 lb-ft 298.3 Nm
Torque RPM:	1400
Starter:	electric
Starter volts:	12

New Holland TN75 Transmission overview

Engine Oil

Type:	constant mesh with mechanical shuttle
Gears:	8 forward and reverse
Clutch:	280mm dry cerametallic plate
Left-hand synchronized mechanical shuttle requires clutching.

New Holland TN75 Dimensions

Wheelbase:	81.5 inches 207 cm (2WD)
	78.9 inches 200 cm (4WD)
Length:	153.3 inches 389 cm (2WD)
	151.6 inches 385 cm (4WD)
Width:	67.2 inches 170 cm
Height (ROPS):	95.1 inches 241 cm
	75.1 inches 190 cm (folded)

New Holland TN75A Weight
Shipping:	5,020 lbs 2277 kg (2WD)
	5,415 lbs 2456 kg (4WD)
Operating:	5,215 lbs 2365 kg (2WD)
	5,810 lbs 2635 kg (4WD)
Ballasted:	7,055 lbs 3200 kg

New Holland TN75 Tests

OCED Tractor Test 2130
Diesel 16-speed 4WD October 1, 2003 – April 1, 2004 Link: OCED Tractor Test 2130 file
PTO performance
Max power:	64.4 hp 48.0 kW
Fuel use:	4.0 gal/hour 15.1 l/hour
Power at rated engine speed:	63.6 hp 47.4 kW
Fuel use:	3.9 gal/hour 14.8 l/hour
Power at rated PTO speed:	63.6 hp 47.4 kW
Fuel use:	3.9 gal/hour 14.8 l/hour
Drawbar performance
Max power:	54.7 hp 40.8 kW
Fuel use:	3.8 gal/hour 14.4 l/hour
Gear 3M Lo used for power test.
Max pull:	6,135 lbs 2782 kg
Gear 1M Hi used for pull test.

FAQ

Is New Holland TN75 a good tractor?

The New Holland TN75 is one of the great tractors in the New Holland stable, and it has earned New Holland a fantastic reputation.

How much oil does a New Holland TN75 take?

Check out the New Holland TN75 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year New Holland made the TN70

The New Holland TN75 was an agricultural tractor model made from 1999 – 2003