Allis Chalmers 7030

Allis Chalmers 7030 Row-Crop tractor Technical Specifications

Allis Chalmers 7030 is a Row-Crop tractor that was produced by the John Deere between 1973 – 1974.

Below you will find detailed technical specifications for Allis Chalmers 7030 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Allis Chalmers 7030 Production

















Manufacturer:
Manufacturer: Allis Chalmers
Type: Row-Crop tractor
Factory: West Allis, Wisconsin, USA
Total built: 3,396
Original price: $17,035


Allis Chalmers 7030 Power













Engine:
Drawbar (claimed): 110 hp
82.0 kW
PTO (claimed): 130.98 hp
97.7 kW
Drawbar (tested): 110.29 hp
82.2 kW
PTO (tested): 130.98 hp
97.7 kW

Allis Chalmers 7030 Mechanical






















Chassis: 4×2 2WD
Steering: hydrostatic power
Brakes: differential hydraulic wet discs
Cab: Cab optional
Transmission: 20-speed partial power shift

Hydraulics




Type: open center

Power Take-off (PTO)







Rear PTO: independent
Rear RPM: 540/1000

Title serial numbers















Location: Above PTO shield
1973: 1001
1974: 2595
Final: 4398


how to read serial numbers…

What year is my Allis Chalmers 7030? Serial Number Decoder

The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.

The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.

Allis Chalmers 7030 Engine detail




























Engine Detail
Allis Chalmers 3500 Mark II
turbocharged diesel
6-cylinder
liquid-cooled
Displacement: 426 ci
7.0 L
Bore/Stroke: 4.25×5.00 inches
108 x 127 mm
Air cleaner: dry
Compression: 16:1
Rated RPM: 2300
Starter volts: 12



Allis Chalmers 7030 Transmission overview

Engine Oil











Transmission: Allis-Chalmers Power Director XX
Type: partial power shift
Gears: 20 forward and 4 reverse
The Power Director provides five gears (1-5) in two ranges (slow-fast) with a two-speed power shift (low-high).

Allis Chalmers 7030 Dimensions



















Wheelbase: 106 inches
269 cm
Length: 163 inches
414 cm
Width: 95.5 inches
242 cm
Height: 116 inches
294 cm
Operating weight: 12,430 lbs
5638 kg
Ballasted weight: 16,560 lbs
7511 kg

Allis Chalmers 7030 Tests

Nebraska Tractor Test 1119













































Nebraska Tractor Test 1119
Diesel 20-speed 2WD
March 13 – 30, 1973
Link: Nebraska Tractor Test 1119 file
PTO performance
Power at rated engine speed: 130.98 hp
97.7 kW
Fuel use: 8.5 gal/hour
32.2 l/hour
Power at rated PTO speed: 131.14 hp
97.8 kW
Fuel use: 8.5 gal/hour
32.2 l/hour
Drawbar performance
Max power: 110.29 hp
82.2 kW
Fuel use: 8.5 gal/hour
32.2 l/hour
Gear 4SL used for power test.
Max pull: 12,610 lbs
5719 kg
Gear 1FL used for pull test.

FAQ

Is Allis Chalmers 7030 a good tractor?

The Allis Chalmers 7030 is one of the great tractors in the Allis Chalmers stable, and it has earned Allis Chalmers a fantastic reputation.

How much oil does a Allis Chalmers 7030 take?

Check out the Allis Chalmers 7030 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Allis Chalmers made the 7030?

The Allis Chalmers 7030 was an agricultural tractor model made from 1973 – 1974

Where is the serial number on a Allis Chalmers 7030?

Lookup above pto shield

Leave a Comment