CaseIH Farmall 90 Utility tractor Specs & Features

Contents show

CaseIH Farmall 90 Utility tractor Technical Specifications

CaseIH Farmall 90 is a Row-Crop tractor that was produced by the John Deere between 2008 – 2010.

Below you will find detailed technical specifications for CaseIH Farmall 90 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

CaseIH Farmall 90 Production

Manufacturer:
Distributor:	CaseIH
Manufacturer:	Turk Tractor
Type:	Utility tractor
Factory:	Ankara, Turkey

CaseIH Farmall 90 Power

Engine:
Engine (gross):	84 hp 62.6 kW
PTO (claimed):	70 hp 52.2 kW
Drawbar (tested):	65.2 hp 48.6 kW
PTO (tested):	73.5 hp 54.8 kW

CaseIH Farmall 90 Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	85
Battery CCA:	800
Battery volts:	12

CaseIH Farmall 90 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Differential lock:

mechanical rear lock

Steering:

power

Brakes:

hydraulic wet disc

Cab:

Flat deck platform with ROPS. Cab optional.

Transmissions:

12-speed mechanical shuttle

20-speed mechanical shuttle with creeper

Hydraulics

Type:	open center
Pressure:	2755 psi 190.0 bar
Rear valves:	1 to 3
Pump flow:	13.6 gpm 51.5 lpm
Total flow:	21.7 gpm 82.1 lpm
Steering flow:	8.1 gpm 30.7 lpm

Tracktor Hitch

Rear Type:	2
Control:	position control and mechanical lower-link draft sensing
Rear lift (at 24″/610mm):	5,025 lbs 2279 kg

Power Take-off (PTO)

Rear PTO:	independent
Clutch:	mechanical dry clutch
Rear RPM:	540

CaseIH Farmall 90 Engine detail

Engine Detail
FPT
turbocharged intercooled diesel
4-cylinder
liquid-cooled
Displacement:	274 ci 4.5 L
Bore/Stroke:	4.094×5.196 inches 104 x 132 mm
Emissions:	Tier 3
Power (gross):	84 hp 62.6 kW
Fuel system:	direct injection with mechanical governor
Air cleaner:	dual dry elements
Pre-heating:	thermostart
Rated RPM:	2300
Starter:	electric
Starter volts:	12

CaseIH Farmall 90 Transmission overview

Engine Oil

Type:	mechanical shuttle
Gears:	12 forward and reverse
Clutch:	mechanical dry disc
Three ranges with four gears per range. Left-hand reverser requires use of clutch to change directions

CaseIH Farmall 90 Dimensions

2WD Wheelbase:	91 inches 231 cm
4WD Wheelbase:	87 inches 220 cm
Height (ROPS):	101.1 inches 256 cm
Height (cab):	103.1 inches 261 cm

CaseIH Farmall 90 Weight
Shipping:	5,702 lbs 2586 kg (2WD ROPS)
	6,254 lbs 2836 kg (4WD ROPS)
	6,363 lbs 2886 kg (2WD cab)
	6,915 lbs 3136 kg (4WD cab)

CaseIH Farmall 90 Tests

OCED Tractor Test 2509

OCED Tractor Test 2509
Diesel 12-speed 4WD December 2008 – 2008, Link: OCED Tractor Test 2509 file
PTO performance
Max power:	73.5 hp 54.8 kW
Fuel use:	4.7 gal/hour 17.8 l/hour
Power at rated engine speed:	72.7 hp 54.2 kW
Fuel use:	4.7 gal/hour 17.8 l/hour
Power at rated PTO speed:	70.3 hp 52.4 kW
Fuel use:	4.4 gal/hour 16.7 l/hour
Drawbar performance
Max power:	65.2 hp 48.6 kW
Fuel use:	4.5 gal/hour 17.0 l/hour
Max pull:	7,265 lbs 3295 kg

FAQ

Is CaseIH Farmall 90 a good tractor?

The CaseIH Farmall 90 is one of the great tractors in the Turk Tractor stable, and it has earned Turk Tractor a fantastic reputation.

How much oil does a CaseIH Farmall 90 take?

Check out the CaseIH Farmall 90 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Turk Tractor made the Farmall 80

The CaseIH Farmall 90 was an agricultural tractor model made from 2008 – 2010