CaseIH Farmall 95

CaseIH Farmall 95 Utility tractor Technical Specifications

CaseIH Farmall 95 is a Row-Crop tractor that was produced by the John Deere between 2008 – 2010.

Below you will find detailed technical specifications for CaseIH Farmall 95 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

CaseIH Farmall 95 Production














Manufacturer:
Distributor: CaseIH
Manufacturer: Turk Tractor
Type: Utility tractor
Factory: Ankara, Turkey


CaseIH Farmall 95 Power













Engine:
Engine (gross): 90 hp
67.1 kW
PTO (claimed): 80 hp
59.7 kW
Drawbar (tested): 74.4 hp
55.5 kW
PTO (tested): 80.7 hp
60.2 kW

CaseIH Farmall 95 Electrical
















Ground: negative
Charging system: alternator
Charging amps: 85
Battery CCA: 800
Battery volts: 12

CaseIH Farmall 95 Mechanical































Chassis: 4×2 2WD
  4×4 MFWD 4WD
Differential lock: mechanical rear lock
Steering: hydrostatic power
Brakes: hydraulic wet disc
Cab: Flat deck platform with ROPS. Cab optional.
Transmissions: 12-speed mechanical shuttle
  20-speed mechanical shuttle with creeper

Hydraulics



















Type: open center
Pressure: 2755 psi
190.0 bar
Rear valves: 1 to 3
Pump flow: 13.6 gpm
51.5 lpm
Total flow: 21.7 gpm
82.1 lpm
Steering flow: 8.1 gpm
30.7 lpm

Tracktor Hitch










Rear Type: 2
Control: position control and mechanical lower-link draft sensing
Rear lift (at 24″/610mm): 5,025 lbs
2279 kg

Power Take-off (PTO)













Rear PTO: independent
Clutch: mechanical dry clutch
Rear RPM: 540
  540/1000 (optional)

CaseIH Farmall 95 Engine detail








































Engine Detail
FPT
turbocharged intercooled diesel
4-cylinder
liquid-cooled
Displacement: 274 ci
4.5 L
Bore/Stroke: 4.094×5.196 inches
104 x 132 mm
Emissions: Tier 3
Power (gross): 90 hp
67.1 kW
Fuel system: direct injection with mechanical governor
Air cleaner: dual dry elements
Pre-heating: thermostart
Rated RPM: 2500
Starter: electric
Starter volts: 12



CaseIH Farmall 95 Transmission overview

Engine Oil











Type: mechanical shuttle
Gears: 12 forward and reverse
Clutch: mechanical dry disc
Three ranges with four gears per range. Left-hand reverser requires use of clutch to change directions

CaseIH Farmall 95 Dimensions













2WD Wheelbase: 94 inches
238 cm
4WD Wheelbase: 92 inches
233 cm
Height (ROPS): 101.1 inches
256 cm
Height (cab): 103.1 inches
261 cm
















CaseIH Farmall 95 Weight
Shipping: 6,107 lbs
2770 kg (2WD ROPS)
  6,659 lbs
3020 kg (4WD ROPS)
  6,768 lbs
3069 kg (2WD cab)
  7,320 lbs
3320 kg (4WD cab)

CaseIH Farmall 95 Tests

OCED Tractor Test 2510









































OCED Tractor Test 2510
Diesel 12-speed 4WD
December 2008 – 2008,
Link: OCED Tractor Test 2510 file
PTO performance
Power at rated engine speed: 80.7 hp
60.2 kW
Fuel use: 5.3 gal/hour
20.1 l/hour
Power at rated PTO speed: 80.6 hp
60.1 kW
Fuel use: 5.2 gal/hour
19.7 l/hour
Drawbar performance
Max power: 74.4 hp
55.5 kW
Fuel use: 5.1 gal/hour
19.3 l/hour
Max pull: 7,415 lbs
3363 kg

FAQ

Is CaseIH Farmall 95 a good tractor?

The CaseIH Farmall 95 is one of the great tractors in the Turk Tractor stable, and it has earned Turk Tractor a fantastic reputation.

How much oil does a CaseIH Farmall 95 take?

Check out the CaseIH Farmall 95 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Turk Tractor made the Farmall 90

The CaseIH Farmall 95 was an agricultural tractor model made from 2008 – 2010

Leave a Comment