Deutz-Fahr M610 Specs & Features

Contents show

Deutz-Fahr M610 Technical Specifications

Deutz-Fahr M610 is a Row-Crop tractor that was produced by the John Deere between 2007 – 2009.

Below you will find detailed technical specifications for Deutz-Fahr M610 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Deutz-Fahr M610 Production

Manufacturer:
Manufacturer:	Deutz-Fahr

Deutz-Fahr M610 Electrical

Charging system:	alternator
Charging amps:	150
Battery volts:	12
Battery AH:	143
	190*Optional

Deutz-Fahr M610 Mechanical

Chassis:

4×4 MFWD 4WD

Steering:

power

Brakes:

wet disc

Cab:

Cab standard with air-conditioning.

Transmissions:

24-speed partial power shift

40-speed creeper

Capacity

Fuel:	71.3 gal 269.9 L
Hydraulic system:	10.6 gal 40.1 L

Hydraulics

Type:	open center
	load sensing*Optional
Capacity:	10.6 gal 40.1 L
Pressure:	2900 psi 200.0 bar
Rear valves:	4
Pump flow:	21.9 gpm 82.9 lpm *Open center
	31.7 gpm 120.0 lpm *Load sensing
Steering flow:	11 gpm 41.6 lpm
Steering press.:	2600 psi 179.3 bar

Tracktor Hitch

Rear Type:	III/II
Control:	position and draft control
Rear lift:	13640 lbs 6187 kg
	20240 lbs 9180 kg *Optional
Front Hitch:	II
Front lift:	8800 lbs 3991 kg

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	540/1000
Engine RPM:	540@1995 540E@1610 1000@1995 1000E@1610
Front PTO:	independent*Optional
Front RPM:	1000
Engine RPM:	1000@1960

Deutz-Fahr M610 Engine detail

Engine Detail
Deutz
turbocharged intercooled diesel
6-cylinder 12-valve
liquid-cooled
Displacement:	369.6 ci 6.1 L
Bore/Stroke:	3.98×4.96 inches 101 x 126 mm
Power:	132 hp 98.4 kW
Maximum Power:	143 hp 106.6 kW
Rated RPM:	2100
Torque:	423.4 lb-ft 574.1 Nm
Torque RPM:	1200
Starter:	electric
Starter volts:	12

Deutz-Fahr M610 Transmission overview

Engine Oil

Transmission:	ZF 7200
Type:	partial power shift
Gears:	24 forward and reverse
Clutch:	wet disc
Four power shift gears in six synchronized ranges with power shuttle.

Deutz-Fahr M610 Dimensions

Wheelbase:	104.3 inches 264 cm
Length:	180.7 inches 458 cm
Height (cab):	115 inches 292 cm
Weight:	12040 lbs 5461 kg

FAQ

Is Deutz-Fahr M610 a good tractor?

The Deutz-Fahr M610 is one of the great tractors in the Deutz-Fahr stable, and it has earned Deutz-Fahr a fantastic reputation.

How much oil does a Deutz-Fahr M610 take?

Check out the Deutz-Fahr M610 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Deutz-Fahr made the M600

The Deutz-Fahr M610 was an agricultural tractor model made from 2007 – 2009