Deutz-Fahr DX 6.50 Row-Crop tractor Specs & Features

Contents show

Deutz-Fahr DX 6.50 Row-Crop tractor Technical Specifications

Deutz-Fahr DX 6.50 is a Row-Crop tractor that was produced by the John Deere between 1983 – 1990.

Below you will find detailed technical specifications for Deutz-Fahr DX 6.50 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Deutz-Fahr DX 6.50 Production

Manufacturer:
Manufacturer:	Deutz-Fahr
Type:	Row-Crop tractor

Deutz-Fahr DX 6.50 Power

Engine:
Engine:	137 hp 102.2 kW
PTO (claimed):	120 hp 89.5 kW
Drawbar (tested):	101.36 hp 75.6 kW
PTO (tested):	122.06 hp 91.0 kW

Deutz-Fahr DX 6.50 Electrical

Ground:	negative
Charging system:	alternator
Battery volts:	12

Deutz-Fahr DX 6.50 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Differential lock:

mechanical rear

OPTITRAC front

Steering:

power

Brakes:

hydraulic dry disc

Cab:

Mastercab standard with air-conditioning.

Transmissions:

24-speed two-speed power shift

32-speed two-speed power shift

Hydraulics

Type:	open center
Pressure:	2538 psi 175.0 bar
Valves:	1 to 3
Pump flow:	24 gpm 90.8 lpm

Tracktor Hitch

Rear Type:	III
Rear lift (at ends):	14330 lbs 6500 kg

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	540/1000 (1.375)
Engine RPM:	540@2192 1000@2214
Front PTO:	independent
Front RPM:	1000

Deutz-Fahr DX 6.50 Engine detail

Engine Detail
Deutz BF6L 913
turbocharged diesel
6-cylinder
air-cooled
Displacement:	373.9 ci 6.1 L
Bore/Stroke:	4.016×4.92 inches 102 x 125 mm
Power:	137 hp 102.2 kW
Rated RPM:	2300
Starter:	electric
Starter volts:	12
Oil capacity:	17 qts 16.1 L

Deutz-Fahr DX 6.50 Transmission overview

Engine Oil

Transmission:	Powermatic
Type:	two-speed power shift
Gears:	24 forward and 8 reverse
Clutch:	cerametallic disc
Oil capacity:	56 qts 53.0 L

Deutz-Fahr DX 6.50 Dimensions

2WD Wheelbase:	105.8 inches 268 cm
4WD Wheelbase:	106.4 inches 270 cm
Length:	179.5 inches 455 cm
Width:	93.3 inches 236 cm
2WD Height:	109.6 inches 278 cm
4WD Height:	116.7 inches 296 cm
2WD Weight:	11243 lbs 5099 kg
4WD Weight:	12081 lbs 5479 kg
Rear tread:	64 to 88 inches 162 to 223 cm

Deutz-Fahr DX 6.50 Tests

Nebraska Tractor Test 1576

Nebraska Tractor Test 1576
Diesel 24-speed 4WD September 9 – 17, 1985 Link: Nebraska Tractor Test 1576 file
PTO performance
Power at rated engine speed:	122.06 hp 91.0 kW
Fuel use:	7.4 gal/hour 28.0 l/hour
Power at rated PTO speed:	123.15 hp 91.8 kW
Fuel use:	7.2 gal/hour 27.3 l/hour
Drawbar performance
Max power:	101.36 hp 75.6 kW
Fuel use:	7.3 gal/hour 27.6 l/hour
Gear 3ML used for power test.
Max pull:	10,734 lbs 4868 kg
Gear 1MH used for pull test.

FAQ

Is Deutz-Fahr DX 6.50 a good tractor?

The Deutz-Fahr DX 6.50 is one of the great tractors in the Deutz-Fahr stable, and it has earned Deutz-Fahr a fantastic reputation.

How much oil does a Deutz-Fahr DX 6.50 take?

Check out the Deutz-Fahr DX 6.50 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Deutz-Fahr made the DX 6.30

The Deutz-Fahr DX 6.50 was an agricultural tractor model made from 1983 – 1990