Farmall 460

Farmall 460 Technical Specifications

Farmall 460 is a Row-Crop tractor that was produced by the John Deere between 1958 – 1963.

Below you will find detailed technical specifications for Farmall 460 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Farmall 460 Production
















Manufacturer:
Manufacturer: Farmall (a part of International Harvester)
Type: Row-Crop tractor
Factory: Rock Island, Illinois, USA
Original price: $4,100 (1963 )
The Farmall 460 experienced rear-end problems associated with too much engine power for the final drive. International offered an entirely new rear end in mid 1959 to replace the original.


Farmall 460 Power
















Engine:
Drawbar (claimed): 45.3 hp
33.8 kW
PTO (claimed): 49.47 hp
36.9 kW
Plows: 4
Drawbar (tested): 46.11 hp
34.4 kW
Belt (tested): 50.10 hp
37.4 kW

Farmall 460 Electrical



















Charging system: generator
Charging amps: 20
Batteries: 2 (diesel)
  1 (gas/LP)
Battery volts: 6 (diesel)
  12 (gas/LP)

Farmall 460 Mechanical






















Chassis: 4×2 2WD
Steering: power
Brakes: differential mechanical disc
Cab: Open operator station.
Transmissions: 5-speed
  10-speed

Capacity




Hydraulic system: 10 gal
37.9 L

Hydraulics










Capacity: 10 gal
37.9 L
Valves: 2
Pump flow: 12 gpm
45.4 lpm

Tracktor Hitch




Type: IH Fast Hitch

Power Take-off (PTO)







Rear PTO: independent
Rear RPM: 540

Title serial numbers





























Location: Serial number plate on the right side of the Farmall 460, on the clutch housing.

photo of 460 serial number

1958: 501
1959: 4765
1960: 16900
1961: 22622
1962: 28029
1963: 31552
Final: 33028


how to read serial numbers…

What year is my Farmall 460? Serial Number Decoder

The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.

The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.

Farmall 460 Engine detail




























Engine Detail
International Harvester C221
gasoline
6-cylinder
liquid-cooled
Displacement: 221 ci
3.6 L
Bore/Stroke: 3.5625×3.6875 inches
90 x 94 mm
Air cleaner: oil bath
Compression: 7.2:1
Rated RPM: 1800
Starter volts: 12



Farmall 460 Transmission overview

Engine Oil












Transmission: sliding gear
Gears: 5 forward and 1 reverse
Oil capacity: 40 qts
37.9 L
Oil type:
IH Hy-Tran


Tractor must be stopped and clutch used to shift gears. An option “heavy tillage gear” was available to replace the third speed in the transmission. Serial number suffix “CC” indicates this option.

Farmall 460 Dimensions








































Wheelbase: 95 inches
241 cm
  100 inches
254 cm (Hi-Clear)
Length: 140 inches
355 cm
  153 inches
388 cm (Hi-Clear)
Width: 83.5 inches
212 cm (min)
  86 inches
218 cm (Hi-Clear min)
  105 inches
266 cm (max)
Height (steering wheel): 78 inches
198 cm (row-crop)
  90 inches
228 cm (Hi-Clear)
Ground clearance: 19.5 inches
49 cm (frame)
  22 inches
55 cm (front-axle)
  25.5 inches
64 cm (rear axle)
  30.5 inches
77 cm (Hi-Clear frame)













Farmall 460 Weight
Operating: 5,835 lbs
2646 kg (gas)
  6,055 lbs
2746 kg (diesel)
Ballasted: 8,931 lbs
4051 kg

Farmall 460 Tests



Nebraska Tractor Test 670































Nebraska Tractor Test 670
Gasoline Torque Amplifier 2WD
September 22 – October 3, 1958
Link: Nebraska Tractor Test 670 file
Belt power (max): 49.47 hp
36.9 kW
Belt fuel use (max): 4.2 gal/hour
15.9 l/hour
Drawbar performance
Max power: 35.95 hp
26.8 kW
Fuel use: 3.6 gal/hour
13.6 l/hour










Nebraska Tractor Test 672

































Nebraska Tractor Test 672
Diesel Torque Amplifier 2WD
September 30 – October 11, 1958
Link: Nebraska Tractor Test 672 file
Belt power (max): 50.10 hp
37.4 kW
Belt fuel use (max): 3.6 gal/hour
13.6 l/hour
Drawbar performance
Max power: 36.19 hp
27.0 kW
Fuel use: 2.9 gal/hour
11.0 l/hour
Gear 3-DD used for power test.
Max pull: 6,846 lbs
3105 kg
Gear 1-TA used for pull test.







Nebraska Tractor Test 676






























Nebraska Tractor Test 676
LP gas Torque Amplifier 2WD
October 20 – 25, 1958
Link: Nebraska Tractor Test 676 file
Belt power (max): 49.85 hp
37.2 kW
Belt fuel use (max): 5.6 gal/hour
21.2 l/hour
Drawbar performance
Max power: 46.11 hp
34.4 kW
Gear 3-DD used for power test.
Max pull: 6,903 lbs
3131 kg
Gear 1-TA used for pull test.

FAQ

Is Farmall 460 a good tractor?

The Farmall 460 is one of the great tractors in the Farmall (a part of International Harvester) stable, and it has earned Farmall (a part of International Harvester) a fantastic reputation.

How much oil does a Farmall 460 take?

Check out the Farmall 460 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Farmall (a part of International Harvester) made the 460?

The Farmall 460 was an agricultural tractor model made from 1958 – 1963

Where is the serial number on a Farmall 460?

Lookup serial number plate on the right side of the farmall 460, on the clutch housing.

Leave a Comment