Farmall B-450 Technical Specifications
Farmall B-450 is a Row-Crop tractor that was produced by the John Deere between 1959 – 1970.
Below you will find detailed technical specifications for Farmall B-450 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Farmall B-450 Production
Manufacturer: |
Manufacturer: |
Farmall (a part of International Harvester)
|
Type: |
Row-Crop tractor
|
Factory: |
Doncaster, England
|
Total built: |
11,011
|
Farmall B-450 Power
Engine: |
Engine: |
55 hp 41.0 kW
|
Farmall B-450 Engine |
International Harvester 4.3L 4-cyl diesel |
Mechanical |
Chassis: |
4×2 2WD
|
Differential lock: |
mechanical rear
|
Steering: |
manual
|
Cab: |
Open operator station.
|
Transmission: |
5-speed gear
|
Capacity |
Fuel: |
20.9 gal 79.1 L
|
Hydraulic system: |
3.6 gal 13.6 L
|
Hydraulics |
Type: |
open center
|
Capacity: |
3.6 gal 13.6 L
|
Pressure: |
2000 psi 137.9 bar
|
Tractor hitch |
Rear Type: |
II
|
Rear lift: |
6240 lbs 2830 kg
|
Power Take-off (PTO) |
Rear RPM: |
540 (1.375)
|
Engine RPM: |
555@1500
|
Dimensions & Tires |
Wheelbase: |
79.5 inches 201 cm
|
Weight: |
5930 lbs 2689 kg
|
Front tire: |
6.00×16
|
Rear tire: |
13.00×30
|
Full dimensions and tires … |
B-450 Serial Numbers |
1959: |
501
|
1960: |
657
|
1961: |
1980
|
1962: |
3047
|
1963: |
5638
|
1964: |
6919
|
1965: |
8042
|
1966: |
9696
|
1967: |
10380
|
1968: |
10764
|
1969: |
11027
|
1970: |
11162
|
Farmall B-450 Mechanical
Chassis: |
4×2 2WD
|
Differential lock: |
mechanical rear
|
Steering: |
manual
|
Cab: |
Open operator station.
|
Transmission: |
5-speed gear
|
Capacity
Fuel: |
20.9 gal 79.1 L
|
Hydraulic system: |
3.6 gal 13.6 L
|
Hydraulics
Type: |
open center
|
Capacity: |
3.6 gal 13.6 L
|
Pressure: |
2000 psi 137.9 bar
|
Tracktor Hitch
Rear Type: |
II
|
Rear lift: |
6240 lbs 2830 kg
|
Power Take-off (PTO)
Rear RPM: |
540 (1.375)
|
Engine RPM: |
555@1500
|
Farmall B-450 Engine detail
Engine Detail |
International Harvester BD-264 |
diesel |
4-cylinder |
liquid-cooled |
Displacement: |
264 ci 4.3 L
|
Bore/Stroke: |
4.00×5.25 inches 102 x 133 mm
|
Power: |
55 hp 41.0 kW
|
Rated RPM: |
1500
|
Torque: |
200 lb-ft 271.2 Nm
|
Torque RPM: |
1100
|
Starter: |
electric
|
Starter volts: |
12
|
Oil capacity: |
9.6 qts 9.1 L
|
Coolant capacity: |
26.4 qts 25.0 L
|
Engine Oil |
Farmall B-450 Transmission overview
Type: |
gear
|
Gears: |
5 forward and 1 reverse
|
Clutch: |
305mm dry disc
|
Oil capacity: |
52.8 qts 50.0 L
|
Farmall B-450 Dimensions
Wheelbase: |
79.5 inches 201 cm
|
Length: |
139.5 inches 354 cm (tricycle)
|
|
144.5 inches 367 cm (wide-front)
|
Height (steering wheel): |
77.75 inches 197 cm
|
Operating weight: |
5930 lbs 2689 kg
|
Clearance (front axle): |
19.6 inches 49 cm
|
Front tread: |
8/11.5/13.75/16.75 inches 20/29/34/42 cm
|
Front tread: |
51 to 81 inches 129 to 205 cm
|
Rear tread: |
64 to 84 inches 162 to 213 cm
|
Rear tread: |
84.5 to 101.25 inches 214 to 257 cm
|
Rear tread: |
96.5 to 113.25 inches 245 to 287 cm
|
FAQ
Is Farmall B-450 a good tractor?
The Farmall B-450 is one of the great tractors in the Farmall (a part of International Harvester) stable, and it has earned Farmall (a part of International Harvester) a fantastic reputation.
How much oil does a Farmall B-450 take?
Check out the Farmall B-450 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Farmall (a part of International Harvester) made the ?
The Farmall B-450 was an agricultural tractor model made from 1959 – 1970
|