Ford 5610 Mark III Technical Specifications
Ford 5610 Mark III is a Row-Crop tractor that was produced by the John Deere between 1988 – 1991.
Below you will find detailed technical specifications for Ford 5610 Mark III covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Ford 5610 Mark III Production
Manufacturer: |
Manufacturer: |
Ford
|
Ford 5610 Mark III Electrical
Ground: |
negative
|
Charging system: |
alternator
|
ROPS Charging amps: |
45
|
Cab Charging amps: |
80
|
Battery volts: |
12
|
Battery AH: |
128
|
Ford 5610 Mark III Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD
|
Final drives: |
planetary
|
Differential lock: |
mechanical rear
|
Steering: |
power
|
Brakes: |
wet disc
|
Cab: |
Four-post ROPS. Cab optional with air-conditioning.
|
Transmission: |
16-speed
|
Hydraulics
Type: |
open center with closed-center valves
|
Pressure: |
2500 psi 172.4 bar
|
Pump flow: |
18.2 gpm 68.9 lpm
|
SCV flow: |
14.5 gpm 54.9 lpm
|
Tracktor Hitch
Rear Type: |
II
|
Rear lift (at ends): |
5874 lbs 2664 kg
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Rear RPM: |
540 (1.375)
|
Engine RPM: |
540@1900
|
Ford 5610 Mark III Engine detail
Engine Detail |
Ford |
diesel |
4-cylinder |
liquid-cooled |
Displacement: |
256 ci 4.2 L
|
Bore/Stroke: |
4.40×4.20 inches 112 x 107 mm
|
Compression: |
16.3:1
|
Rated RPM: |
2070
|
Torque: |
202.8 lb-ft 275.0 Nm
|
Torque RPM: |
1200
|
Engine Oil |
Ford 5610 Mark III Transmission overview
Transmission: |
Dual Power
|
Gears: |
16 forward and 4 reverse
|
Clutch: |
330mm disc
|
Four gears in two ranges, plus reverse range, with two-speed Dual Power power shift. Optional creeper range. |
Ford 5610 Mark III Dimensions
2WD Wheelbase: |
87.5 inches 222 cm
|
4WD Wheelbase: |
88.9 inches 225 cm
|
2WD Length: |
145.2 inches 368 cm
|
4WD Length: |
153.1 inches 388 cm
|
2WD Ground clearance: |
16.6 inches 42 cm
|
4WD Ground clearance: |
13.8 inches 35 cm
|
2WD Front tread: |
52 to 890 inches 132 to 2260 cm
|
4WD Front tread: |
60 to 88 inches 152 to 223 cm
|
Rear tread: |
56 to 80 inches 142 to 203 cm
|
Ford 5610 Weight |
2WD ROPS : |
7280 lbs 3302 kg
|
2WD Cab : |
7700 lbs 3492 kg
|
4WD ROPS : |
7920 lbs 3592 kg
|
4WD Cab : |
8760 lbs 3973 kg
|
Ford 5610 Height |
|
78.4 inches 199 cm
|
Cab: |
104.8 inches 266 cm
|
2WD Exhaust: |
110 inches 279 cm
|
4WD Exhaust: |
113 inches 287 cm
|
FAQ
Is Ford 5610 Mark III a good tractor?
The Ford 5610 Mark III is one of the great tractors in the Ford stable, and it has earned Ford a fantastic reputation.
How much oil does a Ford 5610 Mark III take?
Check out the Ford 5610 Mark III oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Ford made the ?
The Ford 5610 Mark III was an agricultural tractor model made from 1988 – 1991
|