International Harvester 1056 Row-Crop tractor Technical Specifications
International Harvester 1056 is a Row-Crop tractor that was produced by the John Deere between 1982 – 1985.
Below you will find detailed technical specifications for International Harvester 1056 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester 1056 Production
Manufacturer: |
Manufacturer: |
International Harvester
|
Type: |
Row-Crop tractor
|
Factory: |
Neuss, Germany
|
International Harvester 1056 Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Charging amps: |
55
|
Battery volts: |
12
|
Battery AH: |
143
|
International Harvester 1056 Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD
|
Final drives: |
planetary
|
Differential lock: |
mechanical rear
|
Steering: |
power
|
Cab: |
Four-post ROPS. Standard cab and deluxe XL cab optional.
|
Transmissions: |
8-speed
|
|
16-speed two-speed power shift
|
Capacity
Fuel: |
37 gal
140.0 L
|
Hydraulic system: |
12.2 gal
46.2 L
|
Hydraulics
Type: |
open center
|
Capacity: |
12.2 gal
46.2 L
|
Pressure: |
2346 psi
161.8 bar
|
Pump flow: |
11.1 gpm
42.0 lpm
|
Tracktor Hitch
Rear Type: |
II
|
Control: |
position and draft control
|
Rear lift (at ends): |
9171 lbs
4159 kg
|
|
11023 lbs
5000 kg *Optional
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
310mm dry disc
|
Rear RPM: |
540/1000
|
Engine RPM: |
540@1920
1000@2000
|
International Harvester 1056 Engine detail
Engine Detail |
International Harvester D-358 |
diesel |
6-cylinder |
liquid-cooled |
Displacement: |
358 ci
5.9 L
|
Bore/Stroke: |
3.875×5.0625 inches
98 x 129 mm
|
Fuel system: |
direct injection
|
Air cleaner: |
dry
|
Rated RPM: |
2300
|
Torque: |
267 lb-ft
362.1 Nm
|
Torque RPM: |
1400
|
Starter volts: |
12
|
Oil capacity: |
12.7 qts
12.0 L
|
Coolant capacity: |
25.4 qts
24.0 L
|
Engine Oil |
International Harvester 1056 Transmission overview
Gears: |
8 forward and 4 reverse
|
Clutch: |
310mm dry disc
|
International Harvester 1056 Dimensions
2WD Wheelbase: |
103.4 inches
262 cm
|
4WD Wheelbase: |
101.9 inches
258 cm
|
2WD Length: |
165 inches
419 cm
|
4WD Length: |
167.7 inches
425 cm
|
Width: |
91 inches
231 cm
|
Clearance (front axle): |
20.1 inches
51 cm
|
Clearance (rear axle): |
30.1 inches
76 cm
|
2WD Front tread: |
59 to 71 inches
149 to 180 cm
|
4WD Front tread: |
64 to 75 inches
162 to 190 cm
|
Rear tread: |
67 to 87 inches
170 to 220 cm
|
International Harvester 1056 Weight |
2WD ROPS : |
9017 lbs
4090 kg
|
2WD Cab : |
9458 lbs
4290 kg
|
4WD Cab : |
10626 lbs
4819 kg
|
International Harvester 1056 Height |
ROPS: |
103.1 inches
261 cm
|
Cab: |
109.4 inches
277 cm
|
Exhaust: |
109 inches
276 cm
|
FAQ
Is International Harvester 1056 a good tractor?
The International Harvester 1056 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.
How much oil does a International Harvester 1056 take?
Check out the International Harvester 1056 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year International Harvester made the 956
The International Harvester 1056 was an agricultural tractor model made from 1982 – 1985
|
