International Harvester 130 Technical Specifications
International Harvester 130 is a Row-Crop tractor that was produced by the John Deere between 1956 – 1958.
Below you will find detailed technical specifications for International Harvester 130 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester 130 Production
Manufacturer: | |
Manufacturer | International Harvester |
Utility tractor | |
Total built | 9,197 |
Original price was $2,000 in 1958 |
Engine: | 19.91 hp 14.8 kW |
Belt (tested) | 22.23 hp 16.6 kW |
International Harvester 130 Mechanical
Two-wheel drive | |
Manual steering | |
Differential mechanical contracting band brakes | |
Open operator station. |
Power Take-off (PTO)
Rear RPM | 540 |
International Harvester 130 Engine detail
Engine Detail | |
International Harvester C-123 | |
gasoline | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement | 122.7 ci 2.0 L |
Bore/Stroke | 3.125×4.00 inches 79 x 102 mm |
Air cleaner | oil bath |
Compression | 6.8:1 |
Rated RPM | 1400 |
Firing order | 1-3-4-2 |
Starter volts | 6 |
Oil capacity | 5 qts 4.7 L |
Coolant capacity | 15 qts 14.2 L |
Engine Oil |
Type | sliding gear |
Gears | 4 forward and 1 reverse |
Clutch | dry disc |
International Harvester 130 Dimensions
Wheelbase | 71 inches 180 cm |
Length | 107 inches 271 cm |
Width | 56 inches 142 cm |
Height (steering wheel) | 65 inches 165 cm |
Operating weight | 2,800 lbs 1270 kg |
Ballasted weight | 4,650 lbs 2109 kg |
Ground clearance | 21.9 inches 55 cm |
Front tread | 44 to 64 inches 111 to 162 cm |
Rear tread | 40 to 68 inches 101 to 172 cm |
International Harvester 130 Tests
Nebraska Tractor Test 617 | |
Gasoline 4-speed 2WD Link: Nebraska Tractor Test 617 file | |
Belt power (max) | 22.23 hp 16.6 kW |
Belt fuel use (max) | 1.8 gal/hour 6.8 l/hour |
Drawbar performance | |
Max power | 19.91 hp 14.8 kW |
Gear 2 used for power test. | |
Max pull | 2,956 lbs 1340 kg |
Gear 1 used for pull test. |
FAQ
Is International Harvester 130 a good tractor?
The International Harvester 130 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.
How much oil does a International Harvester 130 take?
Check out the International Harvester 130 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year International Harvester made the ?
The International Harvester 130 was an agricultural tractor model made from 1956 – 1958
How much does a International Harvester 130 tractor weight?
Depending on the engine type, the International Harvester 130 weight ranges from 2,800 lbs
1270 kg .
How much can a International Harvester 130 Pull?
The max pulling capacity of the International Harvester 130 tractors starts at 2,956 lbs
1340 kg but may be slightly higher depending on the trim.