International Harvester 284 Compact Utility tractor Technical Specifications
International Harvester 284 is a Row-Crop tractor that was produced by the John Deere between 1976 – 1984.
Below you will find detailed technical specifications for International Harvester 284 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester 284 Production
Manufacturer: | |
Distributor | International Harvester |
Manufacturer | Komatsu |
Compact Utility tractor | |
Built in Japan | |
Original price was $5,000 in 1984 |
Engine: | 21.98 hp 16.4 kW |
PTO (tested) | 27.47 hp 20.5 kW |
International Harvester 284 Electrical
Charging system | alternator |
Gas Charging amps | 35 |
Diesel Charging amps | 20 |
Battery volts | 12 |
International Harvester 284 Mechanical
Drive | 4×2 2WD |
4×4 MFWD 4WD *Optional after 1982. Available only with the diesel engine. | |
Manual steering | |
Hydraulic wet disc brakes | |
Open operator station. Optional two-post ROPS with canopy. |
Capacity
Fuel | 8.7 gal 32.9 L |
Hydraulic system | 3.4 gal 12.9 L |
Hydraulics
Capacity | 3.4 gal 12.9 L |
Pressure | 1920 psi 132.4 bar |
Total flow | 6 gpm 22.7 lpm |
Tracktor Hitch
Rear Type | I |
Control | position control |
Rear lift (at ends) | 2000 lbs 907 kg |
Power Take-off (PTO)
Rear PTO | transmission |
Rear RPM | 540/1000 |
Title serial numbers
1976 | 8005 (gasoline) |
1977 | 8125 (gasoline) |
1978 | 10705 (gasoline) |
1979 | 12425 (gasoline) |
1980 | 13207 (gasoline) |
1981 | 13419 (gasoline) |
1980 | 670 (2WD diesel) |
1981 | 2146 (2WD diesel) |
1982 | 2999 (2WD diesel) |
1983 | 3343 (2WD diesel) |
1984 | 4561 (2WD diesel) |
1980 | 1211 (4WD diesel) |
1981 | 2267 (4WD diesel) |
1983 | 3803 (4WD diesel) |
1984 | 4511 (4WD diesel) |
FAQ: How to read a serial number table. |
What year is my International Harvester 284? Serial Number Decoder
The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.
The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.
International Harvester 284 Engine detail
Engine Detail | |
Mazda M4-71G | |
gasoline | |
4-cylinder | |
liquid-cooled | |
Displacement | 71.3 ci 1.2 L |
Bore/Stroke | 2.756×2.992 inches 70 x 76 mm |
Power | 28 hp 20.9 kW |
Compression | 8.6:1 |
Rated RPM | 2600 |
Torque | 58 lb-ft 78.6 Nm |
Torque RPM | 2200 |
Starter volts | 12 |
Starter power | 1.07 hp 0.8 kW |
Oil capacity | 3.2 qts 3.0 L |
Coolant capacity | 5.2 qts 4.9 L |
Engine Oil |
Transmission | sliding gear |
Gears | 8 forward and 2 reverse |
Clutch | dry disc |
Oil capacity | 13.6 qts 12.9 L |
Four gears plus reverse with high and low ranges. |
International Harvester 284 Dimensions
Wheelbase | 68.6 inches 174 cm |
Length | 104.3 inches 264 cm |
118.7 inches*With 3-point 301 cm | |
Width | 55.5 inches 140 cm |
Height (steering wheel) | 55.9 inches 141 cm |
Height (exhaust) | 72.2 inches 183 cm |
Ground clearance | 13.8 inches (center) 35 cm |
Clearance (front axle) | 16.9 inches 42 cm |
International Harvester 284 Weight | |
Gas Shipping | 2050 lbs 929 kg |
Diesel Shipping | 2270 lbs 1029 kg |
4WD Shipping | 2,657 lbs 1205 kg |
Gas Operating | 2430 lbs 1102 kg |
Diesel Operating | 2740 lbs 1242 kg |
Ballasted | 3600 lbs 1632 kg |
International Harvester 284 Tests
Nebraska Tractor Test 1277 | |
Gasoline 8-speed 2WD May 18 – 24, 1978 Link: Nebraska Tractor Test 1277 file | |
PTO performance | |
Power at rated engine speed | 25.75 hp 19.2 kW |
Fuel use | 2.2 gal/hour 8.3 l/hour |
Power at rated PTO speed | 24.33 hp 18.1 kW |
Fuel use | 2.1 gal/hour 7.9 l/hour |
Drawbar performance | |
Max power | 20.14 hp 15.0 kW |
Fuel use | 2.1 gal/hour 7.9 l/hour |
Max pull | 2,561 lbs 1161 kg |
Nebraska Tractor Test 1387 | |||
Nebraska Tractor Test 1387 | |
Diesel 8-speed 2WD April 30 – May 12, 1981 Link: Nebraska Tractor Test 1387 file | |
PTO performance | |
Power at rated engine speed | 27.47 hp 20.5 kW |
Fuel use | 2.0 gal/hour 7.6 l/hour |
Power at rated PTO speed | 23.92 hp 17.8 kW |
Fuel use | 1.7 gal/hour 6.4 l/hour |
Drawbar performance | |
Max power | 21.98 hp 16.4 kW |
Fuel use | 2.0 gal/hour 7.6 l/hour |
Max pull | 2,523 lbs 1144 kg |
FAQ
Is International Harvester 284 a good tractor?
The International Harvester 284 is one of the great tractors in the Komatsu stable, and it has earned Komatsu a fantastic reputation.
How much oil does a International Harvester 284 take?
Check out the International Harvester 284 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Komatsu made the 284?
The International Harvester 284 was an agricultural tractor model made from 1976 – 1984
How much horsepower is a International Harvester 284?
The 284 engine tested at 21.98 hp
16.4 kW drawbar and 27.47 hp
20.5 kW kW PTO horsepower.
How much does a International Harvester 284 tractor weight?
Depending on the engine type, the International Harvester 284 weight ranges from 2050 to 2740 pounds .
How much can a International Harvester 284 Pull?
The max pulling capacity of the International Harvester 284 tractors starts at 2,561 lbs
1161 kg but may be slightly higher depending on the trim.