John Deere 1026R Sub-Compact Utility tractor Technical Specifications
John Deere 1026R is a Row-Crop tractor that was produced by the John Deere between 2011 – 2012.
Below you will find detailed technical specifications for John Deere 1026R covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 1026R Production
Manufacturer: | |
Manufacturer: | John Deere |
Type: | Sub-Compact Utility tractor |
Factory: | Augusta, Georgia, USA |
Engine: | |
Engine (gross): | 25.2 hp 18.8 kW |
Engine (net): | 23.8 hp 17.7 kW |
PTO (claimed): | 18 hp 13.4 kW |
John Deere 1026R Engine | |
Yanmar 1.1L 3-cyl diesel |
Mechanical | |
Chassis: | 4×4 MFWD 4WD |
Final drives: | spur gear |
Differential lock: | standard |
Steering: | power |
Brakes: | disc |
Cab: | Two-post ROPS. |
Transmission: | hydrostatic |
No photos of the John Deere 1026R are currently available. To submit yours, email it to . Photos may only be used with the permission of the original photographer. |
Capacity | |
Fuel: | 5.6 gal 21.2 L |
Hydraulic system: | 3.25 gal 12.3 L |
Hydraulics | |
Type: | open center |
Capacity: | 3.25 gal 12.3 L |
Pressure: | 2000 psi 137.9 bar |
Valves: | 2 to 3 |
Total flow: | 6.3 gpm 23.8 lpm |
Tractor hitch | |
Rear Type: | Limited I |
Control: | position control |
Rear lift (at ends): | 1433 lbs 650 kg |
Rear lift (at 24″/610mm): | 681 lbs 308 kg |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540 |
Engine RPM: | 540@3200 |
Mid PTO: | independent |
Mid RPM: | 2100 |
Engine RPM: | 2100@3200 |
Dimensions & Tires | |
Wheelbase: | 57.1 inches 145 cm |
Weight: | 1444 lbs 654 kg |
1026R Serial Numbers | |
Location: | Serial number plate on the right side of main tractor frame above the front axle. |
2011: | 110001 |
2012: | 210001 |
2013: | 310001 |
John Deere 1026R Electrical
Ground: | negative |
Charging system: | alternator |
Charging amps: | 40 |
Battery CCA: | 500 |
Battery volts: | 12 |
John Deere 1026R Mechanical
Chassis: | 4×4 MFWD 4WD | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Final drives: | spur gear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Differential lock: | standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Steering: | power | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Brakes: | disc | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cab: | Two-post ROPS. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Transmission: | hydrostatic | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Capacity
Hydraulics
Tracktor Hitch
Power Take-off (PTO)
John Deere 1026R Engine detail
Hydrostatic transmission operated by two foot pedals, left-hand range shift lever, and cruise control. Tractor must be stopped to shift range. | John Deere 1026R Dimensions
FAQIs John Deere 1026R a good tractor? The John Deere 1026R is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation. How much oil does a John Deere 1026R take? Check out the John Deere 1026R oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity. Do tractors have VIN numbers? Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body. What was the last year John Deere made the ? The John Deere 1026R was an agricultural tractor model made from 2011 – 2012 How much can a John Deere 1026R Pull? The max pulling capacity of the John Deere 1026R tractors starts at 7,484 lbs |