John Deere 4010 Row-Crop tractor Technical Specifications
John Deere 4010 is a Row-Crop tractor that was produced by the John Deere between 1960 – 1963.
Below you will find detailed technical specifications for John Deere 4010 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 4010 Production
Manufacturer: | |
Manufacturer | John Deere |
Row-Crop tractor | |
Factories | Waterloo, Iowa, USA |
Mexico | |
Original price | $5,500 (1963) |
Engine: | 71.93 hp 53.6 kW |
PTO (tested) | 84.00 hp 62.6 kW |
John Deere 4010 Electrical
Ground | positive (12V) |
floating (24V) | |
Batteries | 1 (gas) |
2 (diesel) | |
Battery volts | 12 |
John Deere 4010 Mechanical
Two-wheel drive | |
Steering | power assist |
Differential hydraulic wet disc brakes | |
Open operator station. |
Hydraulics
Type | closed center |
Valves | 2 |
Pump flow | 13 gpm 49.2 lpm |
Tracktor Hitch
Rear Type | II |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540/1000 |
1000 |
Title serial numbers
1961 | 1000 |
1962 | 20201 |
1963 | 38200 |
Final | 59316 |
FAQ: How to read a serial number table. |
What year is my John Deere 4010? Serial Number Decoder
The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.
The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.
John Deere 4010 Engine detail
Engine Detail | |
John Deere | |
gasoline | |
6-cylinder | |
liquid-cooled | |
Displacement | 302 ci 4.9 L |
Bore/Stroke | 4.00×4.00 inches 102 x 102 mm |
Compression | 7.5:1 |
Rated RPM | 2200 |
Starter volts | 12 |
Coolant capacity | 24 qts 22.7 L |
Engine Oil |
Transmission | John Deere Syncro-Range |
Type | partially synchronized |
Gears | 8 forward and 3 reverse |
Clutch | dry disc |
Synchro-Range requires the tractor to be stopped and clutch depressed to select one of four shift stations. Once a station is selected the tractor can be shifted on the move between the two forward gears (and single reverse in stations 1, 2, and 3) by using the clutch. |
John Deere 4010 Dimensions
Wheelbase | 99.25 inches 252 cm |
Operating weight | 7,100 lbs 3220 kg |
Ballasted weight | 9,595 lbs 4352 kg |
Rear axle | 3.125 inch diameter 79 mm |
Front tread | 8.375 to 18.25 inches 21 to 46 cm (tricycle) |
Rear tread | 60 to 88 inches 152 to 223 cm |
John Deere 4010 Tests
Nebraska Tractor Test 759 | |
Gasoline 8-speed 2WD September 12 – 23, 1960 Link: Nebraska Tractor Test 759 file | |
PTO performance | |
Power at rated engine speed | 80.86 hp 60.3 kW |
Fuel use | 7.2 gal/hour 27.3 l/hour |
Power at rated PTO speed | 73.91 hp 55.1 kW |
Fuel use | 6.1 gal/hour 23.1 l/hour |
Drawbar performance | |
Max power | 71.25 hp 53.1 kW |
Fuel use | 7.1 gal/hour 26.9 l/hour |
Gear 5 used for power test. | |
Max pull | 7,055 lbs 3200 kg |
Gear 3 used for pull test. |
Nebraska Tractor Test 760 | |||
Nebraska Tractor Test 760 | |
LP gas 8-speed 2WD September 12 – 23, 1960 Link: Nebraska Tractor Test 760 file | |
PTO performance | |
Power at rated engine speed | 80.60 hp 60.1 kW |
Fuel use | 9.2 gal/hour 34.8 l/hour |
Power at rated PTO speed | 72.82 hp 54.3 kW |
Fuel use | 8.1 gal/hour 30.7 l/hour |
Drawbar performance | |
Max power | 71.77 hp 53.5 kW |
Fuel use | 9.1 gal/hour 34.4 l/hour |
Gear 5 used for power test. | |
Max pull | 6,741 lbs 3057 kg |
Gear 3 used for pull test. |
Nebraska Tractor Test 761 | |||
Nebraska Tractor Test 761 | |
Diesel 8-speed 2WD September 19 – 23, 1960 Link: Nebraska Tractor Test 761 file | |
PTO performance | |
Power at rated engine speed | 84.00 hp 62.6 kW |
Fuel use | 5.6 gal/hour 21.2 l/hour |
Power at rated PTO speed | 76.71 hp 57.2 kW |
Fuel use | 4.9 gal/hour 18.5 l/hour |
Drawbar performance | |
Max power | 71.93 hp 53.6 kW |
Fuel use | 5.5 gal/hour 20.8 l/hour |
Gear 5 used for power test. | |
Max pull | 7,002 lbs 3176 kg |
Gear 3 used for pull test. |
FAQ
Is John Deere 4010 a good tractor?
The John Deere 4010 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 4010 take?
Check out the John Deere 4010 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the 4010?
The John Deere 4010 was an agricultural tractor model made from 1960 – 1963
How much horsepower is a John Deere 4010?
The 4010 engine tested at 71.93 hp
53.6 kW drawbar and 84.00 hp
62.6 kW kW PTO horsepower.
How much does a John Deere 4010 tractor weight?
Depending on the engine type, the John Deere 4010 weight ranges from 7,100 lbs
3220 kg .
How much can a John Deere 4010 Pull?
The max pulling capacity of the John Deere 4010 tractors starts at 7,055 lbs
3200 kg but may be slightly higher depending on the trim.