John Deere 4100 Compact Utility tractor Technical Specifications
John Deere 4100 is a Row-Crop tractor that was produced by the John Deere between 1998 – 2001.
Below you will find detailed technical specifications for John Deere 4100 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 4100 Production
| Manufacturer: | |
| Manufacturer | John Deere |
| Compact Utility tractor | |
| Built in Augusta, Georgia, USA | |
| Original price was $13,500 in 2003 | |
| The Deere 4100 was available in a Narrow version which could not be equipped with a mid-PTO. | |
| Engine: | |
| Engine (net) | 19 hp 14.2 kW |
| Engine | 20 hp 14.9 kW |
| Hydro PTO (claimed) | 16 hp 11.9 kW |
| Gear PTO (claimed) | 17 hp 12.7 kW |
| Mechanical | |
| Four-wheel drive | |
| Differential lock | mechanical rear |
| Steering | power |
| Differential wet disc brakes | |
| Two-post ROPS. | |
| John Deere 4100 photos… |
| Capacity | |
| Fuel | 5.8 gal 22.0 L |
| Gear Hydraulic system | 2.5 gal 9.5 L |
| Hydro Hydraulic system | 3.3 gal 12.5 L |
| Front axle | 3.6 qts 3.4 L |
| Hydraulics | |
| Type | open center |
| Gear Capacity | 2.5 gal 9.5 L |
| Hydro Capacity | 3.3 gal 12.5 L |
| Pressure | 2418 psi 166.7 bar |
| Total flow | 5.1 gpm 19.3 lpm |
| Tractor hitch | |
| Rear Type | I |
| Rear lift (at 24″/610mm) | 930 lbs 421 kg |
| Power Take-off (PTO) | |
| Gear Rear PTO | transmission |
| Hydro Rear PTO | independent |
| Rear RPM | 540 |
| Mid RPM | 2100 |
| Dimensions & Tires | |
| Wheelbase | 58 inches 147 cm |
| Weight | 1517 to 1565 pounds |
| Front tire | 5.00-12 |
| Rear tire | 9.5-16 |
| 4100 Serial Numbers | |
| 1998 | 110000 |
| 1999 | 210001 |
| 2000 | 310001 |
| 2001 | 410001 |
John Deere 4100 Electrical
| Ground | negative |
| Charging system | alternator |
| Charging amps | 20 |
| Battery CCA | 433 |
| Battery volts | 12 |
John Deere 4100 Mechanical
| Four-wheel drive | |
| Differential lock | mechanical rear |
| Steering | power |
| Differential wet disc brakes | |
| Two-post ROPS. | |
Capacity
| Fuel | 5.8 gal 22.0 L |
| Gear Hydraulic system | 2.5 gal 9.5 L |
| Hydro Hydraulic system | 3.3 gal 12.5 L |
| Front axle | 3.6 qts 3.4 L |
Hydraulics
| Type | open center |
| Gear Capacity | 2.5 gal 9.5 L |
| Hydro Capacity | 3.3 gal 12.5 L |
| Pressure | 2418 psi 166.7 bar |
| Total flow | 5.1 gpm 19.3 lpm |
Tracktor Hitch
| Rear Type | I |
| Rear lift (at 24″/610mm) | 930 lbs 421 kg |
Power Take-off (PTO)
| Gear Rear PTO | transmission |
| Hydro Rear PTO | independent |
| Rear RPM | 540 |
| Mid RPM | 2100 |
John Deere 4100 Engine detail
| Engine Detail | |
| Yanmar 3TNE74 | |
| diesel | |
| 3-cylinder | |
| liquid-cooled | |
| Displacement | 61.4 ci 1.0 L |
| Bore/Stroke | 2.91×3.07 inches 74 x 78 mm |
| Power | 20 hp 14.9 kW |
| Fuel system | indirect direct injection |
| Air cleaner | dry |
| Pre-heating | glow plugs |
| Compression | 23.5:1 |
| Rated RPM | 2650 |
| Idle RPM | 1025-2860 |
| Torque | 39.7 lb-ft 53.8 Nm |
| Starter volts | 12 |
| Oil capacity | 2.3 qts 2.2 L |
| Coolant capacity | 2.5 qts 2.4 L |
| Engine Oil | |
| Type | partially synchronized |
| Gears | 8 forward and 4 reverse |
| Oil capacity | 9.2 qts 8.7 L |
| Four speeds with high, low, and reverse ranges. Gear shifts can be made while in motion using the clutch. Tractor must be stopped to shift ranges. | |
John Deere 4100 Dimensions
| Wheelbase | 58 inches 147 cm |
| Length | 103 inches 261 cm |
| Width | 43 inches 109 cm |
| 36 inches (Narrow) 91 cm | |
| Height (hood) | 43.6 inches 110 cm |
| Height (ROPS) | 78.9 inches 200 cm |
| Clearance (front axle) | 12.7 inches 32 cm |
| 12.3 inches (turf tires) 31 cm |
| John Deere 4100 Weight | |
| Gear | 1517 lbs 688 kg |
| Hydro | 1565 lbs 709 kg |
| Max Drawbar | 570 lbs 258 kg |
| Max front axle | 992 lbs 449 kg |
| Max rear axle | 1,984 lbs 899 kg |
FAQ
Is John Deere 4100 a good tractor?
The John Deere 4100 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 4100 take?
Check out the John Deere 4100 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the ?
The John Deere 4100 was an agricultural tractor model made from 1998 – 2001
How much does a John Deere 4100 tractor weight?
Depending on the engine type, the John Deere 4100 weight ranges from 1517 to 1565 pounds .
How much can a John Deere 4100 Pull?
The max pulling capacity of the John Deere 4100 tractors starts at 11,058 lbs
5015 kg but may be slightly higher depending on the trim.