John Deere 4110 Compact Utility tractor Technical Specifications
John Deere 4110 is a Row-Crop tractor that was produced by the John Deere between 2002 – 2006.
Below you will find detailed technical specifications for John Deere 4110 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 4110 Production
| Manufacturer: | |
| Distributor: | John Deere |
| Manufacturer: | Yanmar |
| Type: | Compact Utility tractor |
| Factory: | Japan |
| Engine: | |
| Engine: | 20 hp 14.9 kW |
| PTO (claimed): | 17 hp 12.7 kW |
| John Deere 4110 Engine | |
| Yanmar 1.0L 3-cyl diesel |
| Mechanical | |
| Chassis: | 4×4 MFWD 4WD |
| Steering: | power |
| Cab: | Two-post folding ROPS. |
| Transmissions: | 8-speed unsynchronized gear |
| hydrostatic | |
| John Deere 4110 photos… |
| Capacity | |
| Fuel: | 5.8 gal 22.0 L |
| Hydraulic system: | 3.6 gal 13.6 L |
| Front axle: | 3.6 qts 3.4 L |
| Hydraulics | |
| Type: | open center |
| Capacity: | 3.6 gal 13.6 L |
| Valves: | 5 |
| Pump flow: | 5.1 gpm 19.3 lpm |
| Tractor hitch | |
| Rear Type: | I |
| Rear lift (at 24″/610mm): | 1150 lbs 521 kg |
| Power Take-off (PTO) | |
| Gear Rear PTO: | transmission |
| Hydro Rear PTO: | independent |
| Rear RPM: | 540 |
| Mid PTO: | indpendent |
| Mid RPM: | 2100 |
| Dimensions & Tires | |
| Wheelbase: | 58 inches 147 cm |
| Weight: | 1517 to 1579 pounds |
| Front tire: | 5.00-12 |
| Rear tire: | 9.5-16 |
| 4110 Serial Numbers | |
| 2002: | 110000 |
| 2003: | 210000 |
| 2004: | 310000 |
John Deere 4110 Electrical
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 20 |
| Battery CCA: | 435 |
| Battery volts: | 12 |
John Deere 4110 Mechanical
| Chassis: | 4×4 MFWD 4WD | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Steering: | power | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Cab: | Two-post folding ROPS. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Transmissions: | 8-speed unsynchronized gear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hydrostatic | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Capacity
Hydraulics
Tracktor Hitch
Power Take-off (PTO)
John Deere 4110 Engine detail
John Deere 4110 Dimensions
FAQIs John Deere 4110 a good tractor? The John Deere 4110 is one of the great tractors in the Yanmar stable, and it has earned Yanmar a fantastic reputation. How much oil does a John Deere 4110 take? Check out the John Deere 4110 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity. Do tractors have VIN numbers? Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body. What was the last year Yanmar made the 4010 The John Deere 4110 was an agricultural tractor model made from 2002 – 2006 How much can a John Deere 4110 Pull? The max pulling capacity of the John Deere 4110 tractors starts at 11,058 lbs | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||