John Deere 630 Row-Crop tractor Technical Specifications
John Deere 630 is a Row-Crop tractor that was produced by the John Deere between 1958 – 1960.
Below you will find detailed technical specifications for John Deere 630 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 630 Production
Manufacturer: | |
Manufacturer | John Deere |
Row-Crop tractor | |
Factories | Waterloo, Iowa, USA |
Monterrey, Mexico | |
Total built | 17,307 |
Original price was $2,955 in 1958 | |
The John Deere model 630 was available in row-crop, standard, orchard, and high-crop variants. |
Engine: | 44.81 hp 33.4 kW |
Belt (tested) | 49.19 hp 36.7 kW |
John Deere 630 Electrical
Ground | positive |
Batteries | 2 |
Battery volts | 6 |
John Deere 630 Mechanical
Two-wheel drive | |
Steering | manual |
Steering | power OptOptional |
Differential mechanical drum brakes | |
Open operator station. |
Hydraulics
Pressure | 1200 psi 82.7 bar |
Valves | 1 or 2 |
Pump flow | 8.9 gpm 33.7 lpm |
Tracktor Hitch
Rear Type | II |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540 |
Title serial numbers
1958 | 6300000 |
1959 | 6302749 |
1960 | 6314381 |
Final | 6318206 |
FAQ: How to read a serial number table. |
What year is my John Deere 630? Serial Number Decoder
The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.
The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.
John Deere 630 Engine detail
Engine Detail | |
John Deere CD4039 | |
turbocharged diesel | |
4-cylinder | |
liquid-cooled | |
Displacement: | 239 ci 3.9 L |
Bore/Stroke: | 4.19×4.33 inches 106 x 110 mm |
Rated RPM: | 2300 |
Idle RPM: | 1840-2300 |
Starter volts: | 12 |
Oil capacity: | 12.8 qts 12.1 L |
Coolant capacity: | 14.5 qts 13.7 L (ROPS) |
18.5 qts 17.5 L (cab) |
Engine Oil |
Transmission: | John Deere SyncroPlus |
Type: | fully synchronized |
Gears: | 12 forward and 4 reverse |
Clutch: | triple 9-inch wet disc PermaClutch 2 |
Standard transmission. Three gears, plus reverse, in four ranges. |
John Deere 630 Dimensions
Wheelbase: | 94.5 inches 240 cm |
Clearance (front axle): | 18 inches 45 cm (4WD) |
26.4 inches 67 cm (High-Clearance) | |
Clearance (rear axle): | 29.8 inches 75 cm (High-Clearance) |
2WD Front tread: | 58.5 to 98 inches 148 to 248 cm |
4WD Front tread: | 59.7 to 79.5 inches 151 to 201 cm |
Rear tread: | 60.1 to 105.8 inches 152 to 268 cm |
John Deere 6300 Weight | |
Shipping: | 7497 lbs 3400 kg (2WD ROPS) |
8004 lbs 3630 kg (2WD cab) | |
8004 lbs 3630 kg (4WD ROPS) | |
8511 lbs 3860 kg (4WD cab) | |
Operating: | 9295 lbs 4216 kg (4WD Cab) |
John Deere 630 Tests
OCED Tractor Test 1524 | |
Diesel 12-speed 4WD January 1994 – June 1994, Link: OCED Tractor Test 1524 file | |
PTO performance | |
Max power: | 79.8 hp 59.5 kW |
Fuel use: | 4.4 gal/hour 16.7 l/hour |
Power at rated engine speed: | 77.6 hp 57.9 kW |
Fuel use: | 4.5 gal/hour 17.0 l/hour |
Power at rated PTO speed: | 79.5 hp 59.3 kW |
Fuel use: | 4.5 gal/hour 17.0 l/hour |
Drawbar performance | |
Max power: | 62.5 hp 46.6 kW |
Fuel use: | 4.4 gal/hour 16.7 l/hour |
Gear 1C used for power test. | |
Max pull: | 8590 lbs 3896 kg |
Gear 1B used for pull test. |
OCED Tractor Test 1524 | |||
OCED Tractor Test 1524 | |
Diesel 16-speed 4WD June 1994 – 1994, Link: OCED Tractor Test 1524 file | |
PTO performance | |
Max power: | 77.5 hp 57.8 kW |
Fuel use: | 4.5 gal/hour 17.0 l/hour |
Power at rated engine speed: | 76.0 hp 56.7 kW |
Fuel use: | 4.4 gal/hour 16.7 l/hour |
Power at rated PTO speed: | 77.5 hp 57.8 kW |
Fuel use: | 4.5 gal/hour 17.0 l/hour |
Drawbar performance | |
Max power: | 61.5 hp 45.9 kW |
Fuel use: | 4.4 gal/hour 16.7 l/hour |
Gear 1C used for power test. | |
Max pull: | 8480 lbs 3846 kg |
Gear 1B used for pull test. |
FAQ
Is John Deere 630 a good tractor?
The John Deere 630 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 630 take?
Check out the John Deere 630 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the 630?
The John Deere 630 was an agricultural tractor model made from 1958 – 1960
How much does a John Deere 630 tractor weight?
Depending on the engine type, the John Deere 630 weight ranges from 5,858 lbs
2657 kg .