Massey Ferguson 4220 Utility tractor Technical Specifications
Massey Ferguson 4220 is a Row-Crop tractor that was produced by the John Deere between 1997 – 2001.
Below you will find detailed technical specifications for Massey Ferguson 4220 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Massey Ferguson 4220 Production
Manufacturer: |
Manufacturer: |
Massey Ferguson (a part of AGCO)
|
Type: |
Utility tractor
|
Massey Ferguson 4220 Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Battery volts: |
12
|
Massey Ferguson 4220 Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD
|
4WD Differential lock: |
electro-hydraulic front and rear
|
2WD Differential lock: |
electro-hydraulic rear
|
Steering: |
power
|
Brakes: |
hydraulic wet disc
|
Trailer brakes: |
hydraulic*Optional
|
Cab: |
Cab standard with heater.
|
Transmissions: |
8-speed mechanical shuttle
|
|
12-speed synchromesh
|
Capacity
Fuel: |
22.2 gal 84.0 L
|
Hydraulic system: |
13.2 gal 50.0 L
|
Hydraulics
Capacity: |
13.2 gal 50.0 L
|
Pressure: |
3046 psi 210.0 bar
|
Valves: |
1 to 4
|
Pump flow: |
10 gpm 37.9 lpm
|
Total flow: |
14.5 gpm 54.9 lpm
|
|
15.85 gpm 60.0 lpm *With 540E PTO.
|
Tracktor Hitch
Rear Type: |
II/I
|
Control: |
position control and mechanical draft control
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
hydraulic
|
Rear RPM: |
540
|
|
540/540E*Optional
|
Engine RPM: |
540@1789 540@1979*With 540E 540E@1421
|
Massey Ferguson 4220 Engine detail
Engine Detail |
Perkins 903T |
turbocharged diesel |
3-cylinder |
liquid-cooled |
Displacement: |
164.8 ci 2.7 L
|
Bore/Stroke: |
3.74×5.00 inches 95 x 127 mm
|
Power: |
60 hp 44.7 kW
|
Fuel system: |
direct injection
|
Air cleaner: |
dry element
|
Rated RPM: |
2250
|
Torque: |
171.1 lb-ft 232.0 Nm
|
Torque RPM: |
1400
|
Starter: |
electric
|
Starter volts: |
12
|
Coolant capacity: |
10.8 qts 10.2 L
|
Engine Oil |
Massey Ferguson 4220 Transmission overview
Type: |
mechanical shuttle
|
Gears: |
8 forward and reverse
|
Clutch: |
305mm dry disc
|
Four gears (1-4) in two ranges (Low/High) with mechanical shuttle. |
Massey Ferguson 4220 Dimensions
2WD Wheelbase: |
83.9 inches 213 cm
|
4WD Wheelbase: |
87.8 inches 223 cm
|
Length: |
147.2 inches 373 cm
|
Width: |
74.8 inches 189 cm *Minimum width
|
Height (cab): |
94.1 inches 239 cm
|
2WD Weight: |
5258 lbs 2385 kg
|
4WD Weight: |
5809 lbs 2634 kg
|
Ground clearance: |
11 inches 27 cm
|
2WD Front tread: |
49.2 to 73.2 inches 124 to 185 cm
|
4WD Front tread: |
44.1 to 64.2 inches 112 to 163 cm
|
Rear tread: |
52 to 72.1 inches 132 to 183 cm
|
FAQ
Is Massey Ferguson 4220 a good tractor?
The Massey Ferguson 4220 is one of the great tractors in the Massey Ferguson (a part of AGCO) stable, and it has earned Massey Ferguson (a part of AGCO) a fantastic reputation.
How much oil does a Massey Ferguson 4220 take?
Check out the Massey Ferguson 4220 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Massey Ferguson (a part of AGCO) made the 4215
The Massey Ferguson 4220 was an agricultural tractor model made from 1997 – 2001
|