New Holland TN75A Utility tractor Specs & Features

Contents show

New Holland TN75A Utility tractor Technical Specifications

New Holland TN75A is a Row-Crop tractor that was produced by the John Deere between 2004 – 2008.

Below you will find detailed technical specifications for New Holland TN75A covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

New Holland TN75A Production

Manufacturer:
Manufacturer:	New Holland
Type:	Utility tractor
Factory:	Jesi, Italy

New Holland TN75A Power

Engine:
Engine (gross):	75 hp 55.9 kW
Engine:	72 hp 53.7 kW
PTO (claimed):	62 hp 46.2 kW
Drawbar (tested):	54.7 hp 40.8 kW
PTO (tested):	64.4 hp 48.0 kW

New Holland TN75A Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	65
Battery CCA:	730
Battery volts:	12

New Holland TN75A Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD (optional)

Steering:

hydrostatic power

Brakes:

differential wet disc

Cab:

ROPS. Canopy optional

Transmissions:

8-speed constant mesh with mechanical shuttle

12-speed partially synchronized with mechanical shuttle

16-speed partially synchronized with mechanical shuttle

16-speed partially synchronized with power shuttle

Hydraulics

Type:	open center
Pressure:	2755 psi 190.0 bar
Valves:	1 to 4
Pump flow:	16.9 gpm 64.0 lpm
Steering flow:	7.4 gpm 28.0 lpm
	9.4 gpm 35.6 lpm (with power shuttle)

Tracktor Hitch

Rear Type:	II/I
Rear lift (at 24″/610mm):	3,960 lbs 1796 kg

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	540

New Holland TN75A Engine detail

Engine Detail
Iveco
turbocharged diesel
3-cylinder
liquid-cooled
Displacement:	179 ci 2.9 L
Bore/Stroke:	4.094×4.528 inches 104 x 115 mm
Emissions:	Tier 2
Power:	72 hp 53.7 kW
Power (gross):	75 hp 55.9 kW
Fuel use:	3.94 gal/hour 14.9 l/hour
Air cleaner:	dual paper elements
Compression:	16.5:1
Rated RPM:	2300
Torque:	220 lb-ft 298.3 Nm
Torque RPM:	1400
Starter:	electric
Starter volts:	12

New Holland TN75A Transmission overview

Engine Oil

Type:	constant mesh with mechanical shuttle
Gears:	8 forward and reverse
Clutch:	280mm dry cerametallic plate
Left-hand synchronized mechanical shuttle requires clutching.

New Holland TN75A Dimensions

Wheelbase:	81.5 inches 207 cm (2WD)
	78.9 inches 200 cm (4WD)
Length:	153.3 inches 389 cm (2WD)
	151.6 inches 385 cm (4WD)
Width:	67.2 inches 170 cm
Height (ROPS):	95.1 inches 241 cm
	75.1 inches 190 cm (folded)

New Holland TN75A Weight
Shipping:	5,020 lbs 2277 kg (2WD)
	5,415 lbs 2456 kg (4WD)
Operating:	5,215 lbs 2365 kg (2WD)
	5,810 lbs 2635 kg (4WD)
Ballasted:	7,055 lbs 3200 kg

New Holland TN75A Tests

OCED Tractor Test 2130
Diesel 16-speed 4WD October 1, 2003 – April 1, 2004 Link: OCED Tractor Test 2130 file
PTO performance
Max power:	64.4 hp 48.0 kW
Fuel use:	4.0 gal/hour 15.1 l/hour
Power at rated engine speed:	63.6 hp 47.4 kW
Fuel use:	3.9 gal/hour 14.8 l/hour
Power at rated PTO speed:	63.6 hp 47.4 kW
Fuel use:	3.9 gal/hour 14.8 l/hour
Drawbar performance
Max power:	54.7 hp 40.8 kW
Fuel use:	3.8 gal/hour 14.4 l/hour
Gear 3M Lo used for power test.
Max pull:	6,135 lbs 2782 kg
Gear 1M Hi used for pull test.

FAQ

Is New Holland TN75A a good tractor?

The New Holland TN75A is one of the great tractors in the New Holland stable, and it has earned New Holland a fantastic reputation.

How much oil does a New Holland TN75A take?

Check out the New Holland TN75A oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year New Holland made the TN70A

The New Holland TN75A was an agricultural tractor model made from 2004 – 2008