John Deere 5080M Utility tractor Technical Specifications
John Deere 5080M is a Row-Crop tractor that was produced by the John Deere between 2009 – 2013.
Below you will find detailed technical specifications for John Deere 5080M covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 5080M Production
Manufacturer: |
Manufacturer: |
John Deere
|
Type: |
Utility tractor
|
John Deere 5080M Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Battery volts: |
12
|
John Deere 5080M Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD
|
Differential lock: |
electro-hydraulic rear
|
Steering: |
hydrostatic power
|
Brakes: |
wet disc
|
Trailer brakes: |
hydraulic*Optional.
|
|
pneumatic*Optional.
|
Cab: |
Cab standard. Optional air-conditioning.
|
Transmissions: |
32-speed two-speed power shift
|
|
16-speed power shuttle
|
|
16-speed partially synchronized
|
Hydraulics
Type: |
open center
|
Pressure: |
2901 psi 200.0 bar
|
Rear valves: |
3*Maximum
|
Mid valves: |
2*Maximum
|
Pump flow: |
19.55 gpm 74.0 lpm
|
|
24.8 gpm 93.9 lpm *Optional.
|
Tracktor Hitch
Rear Type: |
II
|
Control: |
lower-link draft control*Mechanical standard, electronic optional.
|
Rear lift (at ends): |
8093 lbs 3670 kg
|
Front Hitch: |
II*Optional
|
Front lift (at ends): |
6519 lbs 2957 kg
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
electro-hydraulic wet discs
|
Rear RPM: |
540/540E/ground
|
|
540/540E
|
|
540/540E/1000
|
Engine RPM: |
540@2100 540E@1645 1000@2100
|
Front PTO: |
independent*Optional
|
Clutch: |
electro-hydraulic wet discs
|
Front RPM: |
1000
|
Engine RPM: |
1000@21080
|
John Deere 5080M Engine detail
Engine Detail |
John Deere 4045HL286 |
turbocharged diesel |
4-cylinder |
liquid-cooled |
Displacement: |
276 ci 4.5 L
|
Bore/Stroke: |
4.19×5.00 inches 106 x 127 mm
|
Emissions: |
Tier III
|
Rated Power (EC 97/98): |
80 hp 59.7 kW
|
Maximum Power (EC 97/68): |
81.5 hp 60.8 kW
|
Rated RPM: |
2200
|
Idle RPM: |
875-2350
|
Operating RPM: |
1500-2200
|
Torque: |
249 lb-ft 337.6 Nm
|
Torque RPM: |
1600
|
Firing order: |
1-3-4-2
|
Starter: |
electric
|
Starter volts: |
12
|
Intake valve clearance: |
0.014 inches 0.356 mm
|
Exhaust valve clearance: |
0.018 inches 0.457 mm
|
Engine Oil |
John Deere 5080M Transmission overview
Transmission: |
John Deere PowrReverser Plus
|
Type: |
two-speed power shift
|
Gears: |
32 forward and 16 reverse
|
Clutch: |
electro-hydraulic wet disc
|
Four gears (1-4) in four ranges (A-D) with left hand power shuttle lever. Push-button high/low power shift in each gear. Gear shifts (1-4) are synchronized, using the clutch. Tractor must be stopped, and clutch used, to shift ranges. |
John Deere 5080M Dimensions
Wheelbase: |
88.6 inches 225 cm
|
Height (cab): |
102.2 inches 259 cm
|
4WD Clearance (front axle): |
15.4 inches 39 cm
|
John Deere 5080M Weight |
Shipping: |
8157 lbs 3700 kg
|
2WD Max capacity: |
12000 lbs 5443 kg
|
4WD Max capacity: |
13230 lbs 6001 kg
|
FAQ
Is John Deere 5080M a good tractor?
The John Deere 5080M is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 5080M take?
Check out the John Deere 5080M oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the 5070M
The John Deere 5080M was an agricultural tractor model made from 2009 – 2013
|