John Deere 5080M Utility tractor Specs & Features

Contents show

John Deere 5080M Utility tractor Technical Specifications

John Deere 5080M is a Row-Crop tractor that was produced by the John Deere between 2009 – 2013.

Below you will find detailed technical specifications for John Deere 5080M covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 5080M Production

Manufacturer:
Manufacturer:	John Deere
Type:	Utility tractor

John Deere 5080M Electrical

Ground:	negative
Charging system:	alternator
Battery volts:	12

John Deere 5080M Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Differential lock:

electro-hydraulic rear

Steering:

hydrostatic power

Brakes:

wet disc

Trailer brakes:

hydraulic*Optional.

pneumatic*Optional.

Cab:

Cab standard. Optional air-conditioning.

Transmissions:

32-speed two-speed power shift

16-speed power shuttle

16-speed partially synchronized

Hydraulics

Type:	open center
Pressure:	2901 psi 200.0 bar
Rear valves:	3*Maximum
Mid valves:	2*Maximum
Pump flow:	19.55 gpm 74.0 lpm
	24.8 gpm 93.9 lpm *Optional.

Tracktor Hitch

Rear Type:	II
Control:	lower-link draft control*Mechanical standard, electronic optional.
Rear lift (at ends):	8093 lbs 3670 kg
Front Hitch:	II*Optional
Front lift (at ends):	6519 lbs 2957 kg

Power Take-off (PTO)

Rear PTO:	independent
Clutch:	electro-hydraulic wet discs
Rear RPM:	540/540E/ground
	540/540E
	540/540E/1000
Engine RPM:	540@2100 540E@1645 1000@2100
Front PTO:	independent*Optional
Clutch:	electro-hydraulic wet discs
Front RPM:	1000
Engine RPM:	1000@21080

John Deere 5080M Engine detail

Engine Detail
John Deere 4045HL286
turbocharged diesel
4-cylinder
liquid-cooled
Displacement:	276 ci 4.5 L
Bore/Stroke:	4.19×5.00 inches 106 x 127 mm
Emissions:	Tier III
Rated Power (EC 97/98):	80 hp 59.7 kW
Maximum Power (EC 97/68):	81.5 hp 60.8 kW
Rated RPM:	2200
Idle RPM:	875-2350
Operating RPM:	1500-2200
Torque:	249 lb-ft 337.6 Nm
Torque RPM:	1600
Firing order:	1-3-4-2
Starter:	electric
Starter volts:	12
Intake valve clearance:	0.014 inches 0.356 mm
Exhaust valve clearance:	0.018 inches 0.457 mm

John Deere 5080M Transmission overview

Engine Oil

Transmission:	John Deere PowrReverser Plus
Type:	two-speed power shift
Gears:	32 forward and 16 reverse
Clutch:	electro-hydraulic wet disc
Four gears (1-4) in four ranges (A-D) with left hand power shuttle lever. Push-button high/low power shift in each gear. Gear shifts (1-4) are synchronized, using the clutch. Tractor must be stopped, and clutch used, to shift ranges.

John Deere 5080M Dimensions

Wheelbase:	88.6 inches 225 cm
Height (cab):	102.2 inches 259 cm
4WD Clearance (front axle):	15.4 inches 39 cm

John Deere 5080M Weight
Shipping:	8157 lbs 3700 kg
2WD Max capacity:	12000 lbs 5443 kg
4WD Max capacity:	13230 lbs 6001 kg

FAQ

Is John Deere 5080M a good tractor?

The John Deere 5080M is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.

How much oil does a John Deere 5080M take?

Check out the John Deere 5080M oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year John Deere made the 5070M

The John Deere 5080M was an agricultural tractor model made from 2009 – 2013