CaseIH Farmall 80 Utility tractor Specs & Features

Contents show

CaseIH Farmall 80 Utility tractor Technical Specifications

CaseIH Farmall 80 is a Row-Crop tractor that was produced by the John Deere between 2008 – 2010.

Below you will find detailed technical specifications for CaseIH Farmall 80 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

CaseIH Farmall 80 Production

Manufacturer:
Distributor:	CaseIH
Manufacturer:	Turk Tractor
Type:	Utility tractor
Factory:	Ankara, Turkey

CaseIH Farmall 80 Power

Engine:
Engine (gross):	72 hp 53.7 kW
PTO (claimed):	62 hp 46.2 kW
Drawbar (tested):	59.7 hp 44.5 kW
PTO (tested):	72.1 hp 53.8 kW

CaseIH Farmall 80 Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	85
Battery CCA:	800
Battery volts:	12

CaseIH Farmall 80 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Differential lock:

mechanical rear lock

Steering:

hydrostatic power

Brakes:

hydraulic wet disc

Cab:

Flat deck platform with ROPS. Cab optional.

Transmissions:

12-speed mechanical shuttle

20-speed mechanical shuttle with creeper

Hydraulics

Type:	open center
Rear valves:	1 to 3
Pump flow:	13.6 gpm 51.5 lpm
Total flow:	21.7 gpm 82.1 lpm
Steering flow:	8.1 gpm 30.7 lpm

Tracktor Hitch

Rear Type:	2
Control:	position control and mechanical lower-link draft sensing
Rear lift (at 24″/610mm):	5,025 lbs 2279 kg

Power Take-off (PTO)

Rear PTO:	independent
Clutch:	mechanical dry clutch
Rear RPM:	540

CaseIH Farmall 80 Engine detail

Engine Detail
FPT
turbocharged aftercooled diesel
4-cylinder
liquid-cooled
Displacement:	207 ci 3.4 L
Bore/Stroke:	3.90×4.33 inches 99 x 110 mm
Emissions:	Interim Tier IV
Power (gross):	74 hp 55.2 kW
Fuel system:	electronic high-pressure common rail
Rated RPM:	2300
Starter:	electric
Starter volts:	12

CaseIH Farmall 80 Transmission overview

Engine Oil

Type:	partially synchronized
Gears:	16 forward and reverse
Four synchronized gears in four non-synchronized ranges with mechanical shuttle.

CaseIH Farmall 80 Dimensions

Wheelbase:	96 inches 243 cm
ROPS Length:	148.8 inches 377 cm
Cab Length:	159 inches 403 cm
Width:	52.9 inches 134 cm
Height (ROPS):	90 inches 228 cm
Height (cab):	91.7 inches 232 cm
Ground clearance:	11.2 inches 28 cm
Rear axle:	Flange

CaseIH Farmall 80N Weight
2WD Cab :	5613 lbs 2546 kg
2WD ROPS :	5300 lbs 2404 kg
4WD Cab :	6094 lbs 2764 kg
4WD ROPS :	5886 lbs 2669 kg

CaseIH Farmall 80 Tests

OCED Tractor Test 2583

OCED Tractor Test 2583
Diesel 12-speed 4WD December 2008 – January 2009, Link: OCED Tractor Test 2583 file
PTO performance
Max power:	72.1 hp 53.8 kW
Fuel use:	4.4 gal/hour 16.7 l/hour
Power at rated engine speed:	70.3 hp 52.4 kW
Fuel use:	4.5 gal/hour 17.0 l/hour
Power at rated PTO speed:	70.9 hp 52.9 kW
Fuel use:	4.1 gal/hour 15.5 l/hour
Drawbar performance
Max power:	59.7 hp 44.5 kW
Fuel use:	4.2 gal/hour 15.9 l/hour
Max pull:	4,795 lbs 2175 kg

FAQ

Is CaseIH Farmall 80 a good tractor?

The CaseIH Farmall 80 is one of the great tractors in the Turk Tractor stable, and it has earned Turk Tractor a fantastic reputation.

How much oil does a CaseIH Farmall 80 take?

Check out the CaseIH Farmall 80 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Turk Tractor made the Farmall 70

The CaseIH Farmall 80 was an agricultural tractor model made from 2008 – 2010