Farmall 340 Specs & Features

Contents show

Farmall 340 Technical Specifications

Farmall 340 is a Row-Crop tractor that was produced by the John Deere between 1958 – 1963.

Below you will find detailed technical specifications for Farmall 340 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Farmall 340 Production

Manufacturer:
Manufacturer:	Farmall (a part of International Harvester)
Type:	Row-Crop tractor
Factory:	Rock Island, Illinois, USA

Farmall 340 Power

Engine:
Engine:	47 hp 35.0 kW
Drawbar (tested):	36.14 hp 26.9 kW
PTO (tested):	38.93 hp 29.0 kW
Belt (tested):	34.74 hp 25.9 kW

Farmall 340 Mechanical

Chassis:

4×2 2WD

Steering:

manual

Brakes:

differential mechanical dry disc

Cab:

Open operator station.

Transmissions:

5-speed sliding gear

10-speed partial power shift

Farmall 340 Engine detail

Engine Detail
International Harvester C-135
gasoline
4-cylinder
liquid-cooled
Displacement:	135 ci 2.2 L
Bore/Stroke:	3.25×4.0625 inches 83 x 103 mm
Power:	47 hp 35.0 kW
Air cleaner:	oil bath
Compression:	7.6:1
Rated RPM:	2000
Torque:	128 lb-ft 173.6 Nm
Torque RPM:	1200
Starter volts:	6
Oil capacity:	5 qts 4.7 L
Coolant capacity:	15 qts 14.2 L

Farmall 340 Transmission overview

Engine Oil

Manufacturer:	International Harvester
Type:	sliding gear
Gears:	5 forward and 1 reverse
Clutch:	dry disc

Farmall 340 Dimensions

Length:	117 inches 297 cm
Width:	64 inches 162 cm
Height:	59 inches 149 cm

Farmall 340 Weight
Gas Operating:	4735 lbs 2147 kg
Diesel Operating:	5195 lbs 2356 kg
Ballasted:	7579 lbs 3437 kg

Farmall 340 Tests

Nebraska Tractor Test 665

Nebraska Tractor Test 665
Gasoline Torque Amplifier 2WD September 3 – 25, 1958 Link: Nebraska Tractor Test 665 file
Belt power (max):	34.74 hp 25.9 kW
Belt fuel use (max):	2.9 gal/hour 11.0 l/hour
Drawbar performance
Max power:	31.76 hp 23.7 kW
Gear 3-DD used for power test.
Max pull:	5,142 lbs 2332 kg
Gear 1-DD used for pull test.

Nebraska Tractor Test 775

Nebraska Tractor Test 775
Diesel Torque Amplifier 2WD October 26 – November 3, 1960 Link: Nebraska Tractor Test 775 file
PTO performance
Power at rated engine speed:	38.93 hp 29.0 kW
Fuel use:	2.8 gal/hour 10.6 l/hour
Power at rated PTO speed:	37.39 hp 27.9 kW
Fuel use:	2.8 gal/hour 10.6 l/hour
Drawbar performance
Max power:	36.14 hp 26.9 kW
Fuel use:	2.8 gal/hour 10.6 l/hour
Gear 3-DD used for power test.
Max pull:	5,559 lbs 2521 kg
Gear 1-DD used for pull test.

FAQ

Is Farmall 340 a good tractor?

The Farmall 340 is one of the great tractors in the Farmall (a part of International Harvester) stable, and it has earned Farmall (a part of International Harvester) a fantastic reputation.

How much oil does a Farmall 340 take?

Check out the Farmall 340 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Farmall (a part of International Harvester) made the ?

The Farmall 340 was an agricultural tractor model made from 1958 – 1963