International Harvester 4100 Technical Specifications
International Harvester 4100 is a Row-Crop tractor that was produced by the John Deere between 1965 – 1968.
Below you will find detailed technical specifications for International Harvester 4100 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester 4100 Production
Manufacturer: | |
Manufacturer | International Harvester |
Four-wheel Drive (4WD) tractor | |
Built in Rock Island, Illinois, USA | |
Total built | 1,217 |
Original price | $18,200 (1968) |
Engine: | 110.82 hp 82.6 kW |
International Harvester 4100 Mechanical
Drive | 4×4 4WD |
Steering | hydraulic power |
Integral hydraulic expanding shoe brakes | |
Cab standard |
Hydraulics
Pump flow | 16.5 gpm 62.5 lpm |
Tracktor Hitch
Rear Type | III (optional) |
Power Take-off (PTO)
Rear PTO | optional independent |
Rear RPM | 1000 (1-3/8) |
1000 (1-3/4) |
International Harvester 4100 Engine detail
Engine Detail | |
International Harvester | |
turbocharged diesel | |
6-cylinder | |
liquid-cooled | |
Displacement | 429 ci 7.0 L |
Bore/Stroke | 4.50×4.50 inches 114 x 114 mm |
Air cleaner | dual stage dry |
Compression | 16:1 |
Rated RPM | 2400 |
Starter volts | 12 |
Engine Oil |
Transmission | sliding gear |
Gears | 8 forward and 4 reverse |
Clutch | dry disc |
International Harvester 4100 Dimensions
Wheelbase | 100 inches 254 cm |
Operating weight | 15,175 lbs 6883 kg |
Ballasted weight | 19,100 lbs 8663 kg |
International Harvester 4100 Tests
Nebraska Tractor Test 931 | |
Diesel 8-speed 4WD November 19 – 24, 1965 Link: Nebraska Tractor Test 931 file | |
Drawbar performance | |
Max power | 110.82 hp 82.6 kW |
Fuel use | 8.8 gal/hour 33.3 l/hour |
Gear 4 used for power test. | |
Max pull | 16,365 lbs 7423 kg |
Gear 1 used for pull test. |
FAQ
Is International Harvester 4100 a good tractor?
The International Harvester 4100 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.
How much oil does a International Harvester 4100 take?
Check out the International Harvester 4100 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year International Harvester made the ?
The International Harvester 4100 was an agricultural tractor model made from 1965 – 1968
How much does a International Harvester 4100 tractor weight?
Depending on the engine type, the International Harvester 4100 weight ranges from 15,175 lbs
6883 kg .
How much can a International Harvester 4100 Pull?
The max pulling capacity of the International Harvester 4100 tractors starts at 16,365 lbs
7423 kg but may be slightly higher depending on the trim.