International Harvester 4166 Four-wheel Drive (4WD) tractor Specs & Features

Contents show

International Harvester 4166 Four-wheel Drive (4WD) tractor Technical Specifications

International Harvester 4166 is a Row-Crop tractor that was produced by the John Deere between 1972 – 1976.

Below you will find detailed technical specifications for International Harvester 4166 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

International Harvester 4166 Production

Manufacturer:
Manufacturer:	International Harvester
Type:	Four-wheel Drive (4WD) tractor
Original price:	$29,900 (1976 )

International Harvester 4166 Power

Engine:
Engine:	175 hp 130.5 kW
Drawbar (tested):	127.55 hp 95.1 kW
PTO (tested):	150.63 hp 112.3 kW

International Harvester 4166 Electrical

Charging system:	alternator
Charging amps:	72
Batteries:	2
Battery volts:	6

International Harvester 4166 Mechanical

Chassis:

4×4 4WD

Final drives:

planetary

Steering:

hydraulic power

Brakes:

hydraulic expanding shoe

Cab:

Cab optional with available heat and air-conditioning.

Transmission:

8-speed sliding gear

Hydraulics

Valves:	3*Optional
Pump flow:	16.5 gpm 62.5 lpm

Tracktor Hitch

Rear Type:	III
Rear lift (at ends):	6000 lbs 2721 kg

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	1000

International Harvester 4166 Engine detail

Engine Detail
International Harvester DT-436
turbocharged diesel
6-cylinder
liquid-cooled
Displacement:	436 ci 7.1 L
Bore/Stroke:	4.30×5.00 inches 109 x 127 mm
Power:	175 hp 130.5 kW
Fuel system:	direct injection
Compression:	16:1
Rated RPM:	2400
Starter volts:	12
Oil capacity:	18 qts 17.0 L
Coolant capacity:	32 qts 30.3 L

International Harvester 4166 Transmission overview

Engine Oil

Type:	sliding gear
Gears:	8 forward and 4 reverse
Clutch:	dry disc

International Harvester 4166 Dimensions

Wheelbase:	102 inches 259 cm
Length:	194 inches 492 cm
Width:	103 inches 261 cm
Height (steering wheel):	93 inches 236 cm
Height (exhaust):	138 inches 350 cm
Weight:	15900 lbs 7212 kg
Shiping weight:	15300 lbs 6940 kg
Ground clearance:	17 inches 43 cm
Front tread:	80 inches 203 cm
Rear tread:	80 inches 203 cm

International Harvester 4166 Tests

Nebraska Tractor Test 1116

Nebraska Tractor Test 1116
Diesel 8-speed 4WD November 1 – December 6, 1972 Link: Nebraska Tractor Test 1116 file
PTO performance
Power at rated engine speed:	150.63 hp 112.3 kW
Fuel use:	9.9 gal/hour 37.5 l/hour
Power at rated PTO speed:	152.72 hp 113.9 kW
Fuel use:	9.1 gal/hour 34.4 l/hour
Drawbar performance
Max power:	127.55 hp 95.1 kW
Gear 4-Low used for power test.
Max pull:	19,434 lbs 8815 kg
Gear 1-Low used for pull test.

FAQ

Is International Harvester 4166 a good tractor?

The International Harvester 4166 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.

How much oil does a International Harvester 4166 take?

Check out the International Harvester 4166 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year International Harvester made the 4166?

The International Harvester 4166 was an agricultural tractor model made from 1972 – 1976