International Harvester 5288 Row-Crop tractor Specs & Features

Contents show

International Harvester 5288 Row-Crop tractor Technical Specifications

International Harvester 5288 is a Row-Crop tractor that was produced by the John Deere between 1981 – 1985.

Below you will find detailed technical specifications for International Harvester 5288 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

International Harvester 5288 Production

Manufacturer:
Manufacturer:	International Harvester
Type:	Row-Crop tractor
Factory:	Rock Island, Illinois, USA
Total built:	5,905
Original price:	$60,000 (1985 )

International Harvester 5288 Power

Engine:
Drawbar (claimed):	141 hp 105.1 kW
PTO (claimed):	160 hp 119.3 kW
Drawbar (tested):	137.63 hp 102.6 kW
PTO (tested):	162.6 hp 121.3 kW

International Harvester 5288 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Final drives:

planetary

Differential lock:

mechanical rear

Steering:

power

Brakes:

wet disc

Cab:

Cab standard with heat and air-conditioning. Optional burgundy or western interior finish.

Transmission:

18-speed partial power shift

Capacity

Fuel:	87 gal 329.3 L
Hydraulic system:	43.5 gal 164.6 L

Hydraulics

Type:	closed center
Capacity:	43.5 gal 164.6 L
Valves:	2
Pump flow:	25 gpm 94.6 lpm
	40 gpm 151.4 lpm *Optional
Total flow:	67 gpm 253.6 lpm
	82 gpm 310.4 lpm *Optional
Steering flow:	12 gpm 45.4 lpm

Tracktor Hitch

Rear Type:	III
Rear lift:	8076 lbs 3663 kg

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	1000

International Harvester 5288 Engine detail

Engine Detail
International Harvester DT-466B
turbocharged diesel
6-cylinder
liquid-cooled
Displacement:	466 ci 7.6 L
Bore/Stroke:	4.30×5.35 inches 109 x 136 mm
Rated RPM:	2400
Starter volts:	12
Oil capacity:	20 qts 18.9 L
Coolant capacity:	31 qts 29.3 L

International Harvester 5288 Transmission overview

Engine Oil

Transmission:	Synchro Tri-Six (STS)
Type:	partial power shift
Gears:	18 forward and 6 reverse
Oil capacity:	174 qts 164.7 L
Left lever selects gear, right lever selects high, medium, low, or reverse range. Clutch-free on-the-move powershifting in gear pairs 1/2, 3/4, and 5/6. Synchronized on-the-move shifting (with the clutch) between pairs.

International Harvester 5288 Dimensions

Wheelbase:	111.6 inches 283 cm
Length:	196.6 inches 499 cm
Width:	112 inches 284 cm
Height:	116 inches 294 cm
Shipping weight:	14,610 lbs 6627 kg
Operating weight:	17,055 lbs 7736 kg
Ground clearance:	18.3 inches 46 cm

International Harvester 5288 Tests

Nebraska Tractor Test 1420

Nebraska Tractor Test 1420
Diesel 18-speed 2WD November 13 – 24, 1981 Link: Nebraska Tractor Test 1420 file
PTO performance
Power at rated engine speed:	162.6 hp 121.3 kW
Fuel use:	10.1 gal/hour 38.2 l/hour
Drawbar performance
Max power:	137.63 hp 102.6 kW
Fuel use:	10.0 gal/hour 37.9 l/hour
Max pull:	17577 lbs 7972 kg

FAQ

Is International Harvester 5288 a good tractor?

The International Harvester 5288 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.

How much oil does a International Harvester 5288 take?

Check out the International Harvester 5288 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year International Harvester made the 5088

The International Harvester 5288 was an agricultural tractor model made from 1981 – 1985