International Harvester 856XL Technical Specifications
International Harvester 856XL is a Row-Crop tractor that was produced by the John Deere between 1983 – 1985.
Below you will find detailed technical specifications for International Harvester 856XL covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester 856XL Production
Manufacturer: |
Manufacturer: |
International Harvester
|
Type: |
Row-Crop tractor
|
Factory: |
Neuss, Germany
|
International Harvester 856XL Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Charging amps: |
33
|
Battery volts: |
12
|
Battery AH: |
88
|
International Harvester 856XL Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD
|
Differential lock: |
mechanical rear
|
Steering: |
power
|
Brakes: |
hydraulic wet disc
|
Cab: |
XL cab standard.
|
Transmissions: |
8-speed gear
|
|
16-speed two-speed power shift
|
Capacity
Fuel: |
28 gal
106.0 L
|
Front axle: |
9.5 qts
9.0 L
|
Hydraulics
Pressure: |
2465 psi
170.0 bar
|
Pump flow: |
7.9 gpm
29.9 lpm
|
Tracktor Hitch
Rear Type: |
II
|
Control: |
position and draft control
|
Rear lift: |
8708 lbs
3949 kg
|
Power Take-off (PTO)
International Harvester 856XL Engine detail
Engine Detail |
International Harvester DT-238 |
turbocharged diesel |
4-cylinder |
liquid-cooled |
Displacement: |
238.7 ci
3.9 L
|
Bore/Stroke: |
3.87×5.06 inches
98 x 129 mm
|
Power: |
85 hp
63.4 kW
|
Fuel system: |
direct injection
|
Rated RPM: |
2300
|
Torque: |
229 lb-ft
310.5 Nm
|
Torque RPM: |
1600
|
Starter volts: |
12
|
Oil capacity: |
12.7 qts
12.0 L
|
Coolant capacity: |
22.2 qts
21.0 L
|
Engine Oil |
International Harvester 856XL Transmission overview
Type: |
gear
|
Gears: |
8 forward and 4 reverse
|
Clutch: |
310mm dry disc
|
Oil capacity: |
44.4 qts
42.0 L
|
Four gears in two ranges, plus reverse range. |
International Harvester 856XL Dimensions
2WD Wheelbase: |
93.9 inches
238 cm
|
4WD Wheelbase: |
92.4 inches
234 cm
|
2WD Length: |
144.9 inches
368 cm
|
4WD Length: |
150.4 inches
382 cm
|
2WD Weight: |
8465 lbs
3839 kg
|
4WD Weight: |
9082 lbs
4119 kg
|
2WD Clearance (front axle): |
20.5 inches
52 cm
|
4WD Clearance (front axle): |
15.9 inches
40 cm
|
Clearance (rear axle): |
29.1 inches
73 cm
|
2WD Front tread: |
53 to 72 inches
134 to 182 cm
|
4WD Front tread: |
65 to 71 inches
165 to 180 cm
|
Rear tread: |
62 to 78 inches
157 to 198 cm
|
International Harvester 856XL Height |
2WD Cab: |
104.9 inches
266 cm
|
4WD Cab: |
105.9 inches
268 cm
|
Exhaust: |
111.2 inches
282 cm
|
FAQ
Is International Harvester 856XL a good tractor?
The International Harvester 856XL is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.
How much oil does a International Harvester 856XL take?
Check out the International Harvester 856XL oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year International Harvester made the ?
The International Harvester 856XL was an agricultural tractor model made from 1983 – 1985
|
