J.I. Case 351 Specs & Features

Contents show

J.I. Case 351 Technical Specifications

J.I. Case 351 is a Row-Crop tractor that was produced by the John Deere between 1957.

Below you will find detailed technical specifications for J.I. Case 351 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

J.I. Case 351 Production

Manufacturer:
Manufacturer:	J.I. Case
Type:	Row-Crop tractor
Factory:	Rock Island, Illinois, USA
Total built:	905
Original price:	$3,100 (1958 )
The Case 350 was an upgraded model 300 with a larger engine. It was available as the model 350 standard or the model 351 row-crop tractor.

J.I. Case 351 Mechanical

Chassis:

4×2 2WD

Steering:

manual

Brakes:

disc

Cab:

Open operator station.

Transmissions:

12-speed gear

4-speed gear

Hydraulics

Type:

open center

Tracktor Hitch

Type:

Case Eagle Hitch

Power Take-off (PTO)

Rear PTO:	live
Rear RPM:	540 (1.375)

J.I. Case 351 Engine detail

Engine Detail
J.I. Case
gasoline
4-cylinder
liquid-cooled
Displacement:	164.5 ci 2.7 L
Bore/Stroke:	3.6525×4.125 inches 93 x 105 mm
Air cleaner:	oil bath
Compression:	7.25:1
Rated RPM:	1900
Torque:	136 lb-ft 184.4 Nm
Torque RPM:	1300
Starter volts:	12
Oil capacity:	5 qts 4.7 L
Coolant capacity:	12 qts 11.4 L

J.I. Case 351 Transmission overview

Engine Oil

Transmission:	Tripl-Range
Type:	gear
Gears:	12 forward and 3 reverse
Four gears (1-4) plus reverse (R), with three ranges per gear (low, direct, high).

J.I. Case 351 Dimensions

Wheelbase:	87.1 inches 221 cm
Length:	138 inches 350 cm
Width:	80.75 inches 205 cm
Height (steering wheel):	64.1 inches 162 cm
Height (hood):	60.25 inches 153 cm
Weight:	3840 lbs 1741 kg
Rear axle:	2.5 inch diameter 63 mm
Front tread:	54 to 78 inches 137 to 198 cm
Rear tread:	54 to 88 inches 137 to 223 cm

FAQ

Is J.I. Case 351 a good tractor?

The J.I. Case 351 is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.

How much oil does a J.I. Case 351 take?

Check out the J.I. Case 351 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year J.I. Case made the 351?

The J.I. Case 351 was an agricultural tractor model made from 1957

How much can a J.I. Case 351 Pull?

The max pulling capacity of the J.I. Case 351 tractors starts at 7,409 lbs
3360 kg but may be slightly higher depending on the trim.