John Deere 4930 Technical Specifications
John Deere 4930 is a Row-Crop tractor that was produced by the John Deere between 1978 – 1981.
Below you will find detailed technical specifications for John Deere 4930 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 4930 Production
Manufacturer: |
Manufacturer: |
John Deere
|
Type: |
Row-Crop tractor
|
Factory: |
Waterloo, Iowa, USA
|
The John Deere 4930 was the similar to the US model 4440, exported to Argentina from the United States. |
John Deere 4930 Power
Engine: |
Engine: |
160 hp 119.3 kW
|
PTO (claimed): |
130 hp 96.9 kW
|
John Deere 4930 Engine |
John Deere 7.6L 6-cyl diesel |
Fuel tank: |
65 gal 246.0 L
|
Mechanical |
Chassis: |
4×2 2WD
|
|
4×4 HFWD 4WD
|
Differential lock: |
hydraulic rear
|
Steering: |
power
|
Brakes: |
hydraulic wet disc
|
Cab: |
Sound Gard cab with air-conditioning optional.
|
Transmissions: |
16-speed partial power shift
|
|
8-speed full power shift
|
Hydraulics |
Type: |
closed center
|
Pressure: |
2250 psi 155.1 bar
|
2WD Pump flow: |
23 gpm 87.1 lpm
|
4WD Pump flow: |
26.5 gpm 100.3 lpm
|
Tractor hitch |
Rear Type: |
III/IIIN
|
Control: |
position and draft control
|
Power Take-off (PTO) |
Rear PTO: |
independent
|
Clutch: |
hydraulic wet discs
|
Rear RPM: |
540/1000 (1.375)
|
Engine RPM: |
540@2200
|
Dimensions & Tires |
Wheelbase: |
106.7 inches 271 cm
|
Weight: |
10523 to 11523 pounds
|
Front tire: |
10.00-15
|
Rear tire: |
23.1×30
|
Full dimensions and tires … |
4930 Serial Numbers |
Location: |
Serial number plate on the rear of the 4930, above the PTO shaft.
|
John Deere 4930 Electrical
Ground: |
negative
|
Charging system: |
alternator
|
ROPS Charging amps: |
61
|
Cab Charging amps: |
72
|
Batteries: |
2
|
Battery CCA: |
800
|
Battery volts: |
6
|
Battery Group: |
5D
|
John Deere 4930 Mechanical
Chassis: |
4×2 2WD
|
|
4×4 HFWD 4WD
|
Differential lock: |
hydraulic rear
|
Steering: |
power
|
Brakes: |
hydraulic wet disc
|
Cab: |
Sound Gard cab with air-conditioning optional.
|
Transmissions: |
16-speed partial power shift
|
|
8-speed full power shift
|
Hydraulics
Type: |
closed center
|
Pressure: |
2250 psi 155.1 bar
|
2WD Pump flow: |
23 gpm 87.1 lpm
|
4WD Pump flow: |
26.5 gpm 100.3 lpm
|
Tracktor Hitch
Rear Type: |
III/IIIN
|
Control: |
position and draft control
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
hydraulic wet discs
|
Rear RPM: |
540/1000 (1.375)
|
Engine RPM: |
540@2200
|
John Deere 4930 Engine detail
Engine Detail |
John Deere |
intercooled turbocharged diesel |
6-cylinder |
liquid-cooled inline |
Displacement: |
466 ci 7.6 L
|
Bore/Stroke: |
4.5625×4.75 inches 116 x 121 mm
|
Power: |
160 hp 119.3 kW
|
Fuel system: |
direct injection
|
Air cleaner: |
dry
|
Pre-heating: |
ether injection
|
Rated RPM: |
2200
|
Idle RPM: |
800-2400
|
Operating RPM: |
1500-2200
|
Firing order: |
1-5-3-6-2-4
|
Starter volts: |
12
|
Oil capacity: |
20 qts 18.9 L
|
Coolant capacity: |
36 qts 34.1 L
|
Engine Oil |
John Deere 4930 Transmission overview
Transmission: |
Quad-Range
|
Type: |
partial power shift
|
Gears: |
16 forward and 6 reverse
|
Clutch: |
hydraulic wet disc
|
Four gears (1-4) in four ranges (A-D). Power shift between pairs 1-2 and 3-4 in each range, with synchronized shift between 2-3. Two reverses in ranges A-C. Tractor must be stopped, and clutch used, to shift ranges. Power shift is provided hy a hydraulically-controlled planetary that provides an under-drive to each gear. |
John Deere 4930 Dimensions
Wheelbase: |
106.7 inches 271 cm
|
Length: |
158.6 inches 402 cm
|
Width: |
90 inches 228 cm
|
Height: |
117.3 inches 297 cm
|
Front tread: |
55.9 to 91.7 inches 141 to 232 cm
|
Rear tread: |
68.1 to 110.2 inches 172 to 279 cm
|
John Deere 4930 Weight |
2WD Shipping: |
10523 lbs 4773 kg
|
4WD Shipping: |
11523 lbs 5226 kg
|
Ballasted: |
18522 lbs 8401 kg
|
FAQ
Is John Deere 4930 a good tractor?
The John Deere 4930 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 4930 take?
Check out the John Deere 4930 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the 4730
The John Deere 4930 was an agricultural tractor model made from 1978 – 1981
How much can a John Deere 4930 Pull?
The max pulling capacity of the John Deere 4930 tractors starts at 17,307 lbs
7850 kg but may be slightly higher depending on the trim.
|