John Deere 5225 Utility tractor Specs & Features

Contents show

John Deere 5225 Utility tractor Technical Specifications

John Deere 5225 is a Row-Crop tractor that was produced by the John Deere between 2005 – 2008.

Below you will find detailed technical specifications for John Deere 5225 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 5225 Production

Manufacturer:
Manufacturer:	John Deere
Type:	Utility tractor
Factory:	Augusta, Georgia, USA

John Deere 5225 Power

Engine:
Engine (gross):	56 hp 41.8 kW
PTO (claimed):	45 hp 33.6 kW
PTO (tested):	47.59 hp 35.5 kW

John Deere 5225 Electrical

Ground:	negative
Charging system:	alternator
ROPS Charging amps:	70
Cab Charging amps:	90
Battery CCA:	950
Battery volts:	12
Battery Group:	BCI 31

John Deere 5225 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Final drives:

inboard planetary

Differential lock:

mechanical rear

Steering:

power

Brakes:

differential hydraulic wet disc

Cab:

Open operator station with two-post folding ROPS. Optional isolated flat-platform (IOOS). Cab available with air-conditioning.

Transmissions:

9-speed partially synchronized

12-speed power shuttle

24-speed two-speed power shift

Capacity

Fuel:	25 gal 94.6 L (straddle)
	33.5 gal 126.8 L (IOOS/cab)
Hydraulic system:	10.3 gal 39.0 L (9-speed)
	11.5 gal 43.5 L (12-speed)
Front hubs:	0.74 qts 0.7 L *Each
Front diff.:	4.8 qts 4.5 L

Hydraulics

Type:	open center
Capacity:	10.3 gal 39.0 L (9-speed)
	11.5 gal 43.5 L (12-speed)
Pressure:	2828 psi 195.0 bar
Rear valves:	1 to 3
Mid valves:	0, 2 or 3
Pump flow:	13.5 gpm 51.1 lpm
Total flow:	19.4 gpm 73.4 lpm
Steering flow:	5.9 gpm 22.3 lpm
Steering press.:	1957 psi 134.9 bar

Tracktor Hitch

Rear Type:	II/I
Control:	top-link draft sensing
Rear lift (at 24″/610mm):	3374 lbs 1530 kg

Power Take-off (PTO)

Rear PTO:	independent
Clutch:	dry disc
	electro-hydraulic wet disc (24-speed)
Rear RPM:	540
	540/540E*Optional
	540/1000*Optional field conversion kit.
Engine RPM:	540@2400 540E@1700

Title serial numbers

Location:	Left side of tractor frame above the front axle.
photo of 5225 serial number
2005:	120001
2006:	220001
2007:	320001
2008:	420001
how to read serial numbers…

What year is my John Deere 5225? Serial Number Decoder

The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.

The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.

John Deere 5225 Engine detail

Engine Detail
John Deere
turbocharged diesel
5-cylinder
liquid-cooled
Displacement:	186.1 ci 3.1 L
Bore/Stroke:	3.385×4.134 inches 86 x 105 mm
Emissions:	Tier II
Power (gross):	56 hp 41.8 kW
Air cleaner:	paper and felt elements
Compression:	20.5:1
Rated RPM:	2400
Idle RPM:	900-2625
Operating RPM:	1600-2400
Starter volts:	12
Coolant capacity:	10 qts 9.5 L

John Deere 5225 Transmission overview

Engine Oil

Transmission:

John Deere SyncShuttle

Type:

partially synchronized

Gears:

9 forward and 3 reverse

Clutch:

dry disc

Oil capacity:

41.2 qts
39.0 L

Oil type:

122^o–10^oF [50^o–23^oC]	: Hy-Gard
86^o–40^oF [30^o–40^oC]	: Low-Viscosity Hy-Gard

Three gears (1-3) plus reverse in three ranges (A-C). Gears may be shifted on the move using the clutch. Tractor must be stopped, and clutch used, to shift ranges.

John Deere 5225 Dimensions

Wheelbase:	85.7 inches 217 cm
2WD Length:	136.9 inches 347 cm
4WD Length:	141.6 inches 359 cm
2WD Clearance (front axle):	18 inches 45 cm
4WD Clearance (front axle):	15.8 inches 40 cm
Clearance (drawbar):	15 inches 38 cm
Rear axle:	Flange: 57.3 inch length 1455 mm

John Deere 5225 Weight
Shipping:	5350 lbs 2426 kg (2WD straddle)
	5935 lbs 2692 kg (4WD straddle)
	5485 lbs 2487 kg (2WD IOOS)
	6030 lbs 2735 kg (4WD IOOS)
	5995 lbs 2719 kg (2WD cab)
	6580 lbs 2984 kg (4WD cab)
4WD ROPS Operating:	5650 lbs 2562 kg
Max Drawbar:	1675 lbs 759 kg (extended)
	2470 lbs 1120 kg (retracted)

John Deere 5225 Height
Steering wheel:	62.7 inches 159 cm (straddle)
	69.2 inches 175 cm (IOOS)
2WD Hood:	53 inches 134 cm
4WD Hood:	53.6 inches 136 cm
ROPS:	93.9 inches 238 cm (straddle)
	101.7 inches 258 cm (IOOS)
Cab:	95.9 inches 243 cm
Exhaust:	88.5 inches 224 cm (straddle)
	87.3 inches 221 cm (IOOS)

John Deere 5225 Tests

Nebraska Tractor Test 1866

Nebraska Tractor Test 1866
Diesel 9-speed 4WD November 21 – 23, 2005 Link: Nebraska Tractor Test 1866 file
PTO performance
Max power:	47.59 hp 35.5 kW
Fuel use:	3.1 gal/hour 11.7 l/hour
Power at rated engine speed:	46.20 hp 34.5 kW
Fuel use:	3.4 gal/hour 12.9 l/hour

FAQ

Is John Deere 5225 a good tractor?

The John Deere 5225 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.

How much oil does a John Deere 5225 take?

Check out the John Deere 5225 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year John Deere made the 5225?

The John Deere 5225 was an agricultural tractor model made from 2005 – 2008

Where is the serial number on a John Deere 5225?

Lookup left side of tractor frame above the front axle.