Massey Ferguson 2775 Row-Crop tractor Specs & Features

Contents show

Massey Ferguson 2775 Row-Crop tractor Technical Specifications

Massey Ferguson 2775 is a Row-Crop tractor that was produced by the John Deere between 1978 – 1983.

Below you will find detailed technical specifications for Massey Ferguson 2775 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Massey Ferguson 2775 Production

Manufacturer:
Manufacturer:	Massey Ferguson
Type:	Row-Crop tractor
Original price:	$51,500 (1983 )

Massey Ferguson 2775 Power

Engine:
PTO (claimed):	160 hp 119.3 kW
Drawbar (tested):	139.30 hp 103.9 kW
PTO (tested):	165.95 hp 123.7 kW

Massey Ferguson 2775 Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	58
Batteries:	2
Battery volts:	12

Massey Ferguson 2775 Mechanical

Chassis:

4×2 2WD

Final drives:

planetary

Steering:

hydrostatic power

Brakes:

hydraulic wet disc

Cab:

Cab standard with air-conditioning. Available platform configuration with four-post ROPS.

Transmissions:

24-speed 3-speed power shift

8-speed mechanical shuttle

Hydraulics

Type:	open center
Valves:	2 or 3
Pump flow:	17.1 gpm 64.7 lpm (high-pressure)
	6.6 gpm 25.0 lpm (low-pressure)
	17.1 gpm 64.7 lpm (aux. high-pressure)
Steering flow:	5.7 gpm 21.6 lpm

Tracktor Hitch

Rear Type:	III/II
Control:	position control and lower-link draft sensing

Power Take-off (PTO)

Rear PTO:	independent
Clutch:	hydraulic
Rear RPM:	1000 (1.375)
Engine RPM:	1000@2090

Massey Ferguson 2775 Engine detail

Engine Detail
Perkins AV8.640
diesel
8-cylinder
liquid-cooled
Displacement:	640 ci 10.5 L
Bore/Stroke:	4.63×4.75 inches 118 x 121 mm
Fuel system:	direct injection
Air cleaner:	dual dry element
Compression:	15:1
Rated RPM:	2600
Starter:	electric
Starter volts:	12
Oil capacity:	24 qts 22.7 L
Coolant capacity:	55 qts 52.1 L

Massey Ferguson 2775 Transmission overview

Engine Oil

Transmission:	Multi-Power
Type:	3-speed power shift
Gears:	24 forward and 6 reverse
Clutch:	356mm dual cerametallic dry disc
Oil capacity:	120 qts 113.6 L
Eight forward gears with three power shift speeds in each gear.

Massey Ferguson 2775 Dimensions

Wheelbase:	110 inches 279 cm
Length:	190 inches 482 cm
Width:	91.6 inches 232 cm (standard axle)
	125.7 inches 319 cm (long axle)
	156.9 inches 398 cm (extra-long axle)
Clearance (front axle):	25.4 inches 64 cm
Clearance (drawbar):	15.7 inches 39 cm
Rear axle:	3.75 inch diameter 95 mm
Front tread:	60 to 80 inches 152 to 203 cm
Front tread:	70 to 90 inches 177 to 228 cm (wide axle)
Rear tread:	71 to 92 inches 180 to 233 cm (standard)
Rear tread:	62 to 95 inches 157 to 241 cm (PAVT standard)
Rear tread:	71 to 126 inches 180 to 320 cm (long)
Rear tread:	62 to 129 inches 157 to 327 cm (PAVT long)
Rear tread:	71 to 161 inches 180 to 408 cm (extra-long)
Rear tread:	62 to 165 inches 157 to 419 cm (PAVT extra-long)

Massey Ferguson 2775 Weight
Shipping:	13300 lbs 6032 kg
Operating:	16230 lbs 7361 kg
Ballasted:	20440 lbs 9271 kg

Massey Ferguson 2775 Height
Steering wheel:	87.2 inches 221 cm
Hood:	72.9 inches 185 cm
Cab:	112.1 inches 284 cm

Massey Ferguson 2775 Tests

Nebraska Tractor Test 1278

Nebraska Tractor Test 1278
Diesel 24-speed 2WD May 26 – June 2, 1978 Link: Nebraska Tractor Test 1278 file
PTO performance
Power at rated engine speed:	165.95 hp 123.7 kW
Fuel use:	11.1 gal/hour 42.0 l/hour
Power at rated PTO speed:	149.86 hp 111.8 kW
Fuel use:	9.3 gal/hour 35.2 l/hour
Drawbar performance
Max power:	139.30 hp 103.9 kW
Fuel use:	11.1 gal/hour 42.0 l/hour
Gear 5I used for power test.
Max pull:	17407 lbs 7895 kg
Gear 2H used for pull test.

Nebraska Tractor Test 1389

Nebraska Tractor Test 1389
Diesel 8-speed 2WD May 13 – June 1, 1981 Link: Nebraska Tractor Test 1389 file
PTO performance
Power at rated engine speed:	162.09 hp 120.9 kW
Fuel use:	11.1 gal/hour 42.0 l/hour
Power at rated PTO speed:	146.87 hp 109.5 kW
Fuel use:	9.3 gal/hour 35.2 l/hour
Drawbar performance
Max power:	136.54 hp 101.8 kW
Fuel use:	11.0 gal/hour 41.6 l/hour
Gear 5 used for power test.
Max pull:	16766 lbs 7605 kg
Gear 2 used for pull test.

FAQ

Is Massey Ferguson 2775 a good tractor?

The Massey Ferguson 2775 is one of the great tractors in the Massey Ferguson stable, and it has earned Massey Ferguson a fantastic reputation.

How much oil does a Massey Ferguson 2775 take?

Check out the Massey Ferguson 2775 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Massey Ferguson made the 2745

The Massey Ferguson 2775 was an agricultural tractor model made from 1978 – 1983