Massey Ferguson 2805 Row-Crop tractor Specs & Features

Contents show

Massey Ferguson 2805 Row-Crop tractor Technical Specifications

Massey Ferguson 2805 is a Row-Crop tractor that was produced by the John Deere between 1978 – 1983.

Below you will find detailed technical specifications for Massey Ferguson 2805 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Massey Ferguson 2805 Production

Manufacturer:
Manufacturer:	Massey Ferguson
Type:	Row-Crop tractor
Original price:	$60,200 (1983 )

Massey Ferguson 2805 Power

Engine:
PTO (claimed):	190 hp 141.7 kW
Drawbar (tested):	160.48 hp 119.7 kW
PTO (tested):	194.62 hp 145.1 kW

Massey Ferguson 2805 Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	58
Batteries:	2
Battery volts:	12

Massey Ferguson 2805 Mechanical

Chassis:

4×2 2WD

Final drives:

planetary

Steering:

hydrostatic power

Brakes:

hydraulic wet disc

Cab:

Cab standard with air-conditioning. Available platform configuration with four-post ROPS.

Transmissions:

24-speed 3-speed power shift

8-speed mechanical shuttle

Hydraulics

Type:	open center
Valves:	2 or 3
Pump flow:	16.5 gpm 62.5 lpm (high-pressure)
	6.4 gpm 24.2 lpm (low-pressure)
	16.5 gpm 62.5 lpm (aux. high-pressure)
Steering flow:	5.5 gpm 20.8 lpm

Tracktor Hitch

Rear Type:	III/II
Control:	position control and lower-link draft sensing

Power Take-off (PTO)

Rear PTO:	independent
Clutch:	hydraulic
Rear RPM:	1000 (1.375)
Engine RPM:	1000@2090

Massey Ferguson 2805 Engine detail

Engine Detail
Perkins ATV8.640
turbocharged diesel
8-cylinder
liquid-cooled
Displacement:	640 ci 10.5 L
Bore/Stroke:	4.63×4.75 inches 118 x 121 mm
Fuel system:	direct injection
Air cleaner:	dual dry element
Compression:	16:1
Rated RPM:	2500
Starter:	electric
Starter volts:	12
Oil capacity:	24 qts 22.7 L
Coolant capacity:	55 qts 52.1 L

Massey Ferguson 2805 Transmission overview

Engine Oil

Transmission:	Multi-Power
Type:	3-speed power shift
Gears:	24 forward and 6 reverse
Clutch:	356mm dual cerametallic dry disc
Oil capacity:	120 qts 113.6 L
Eight forward gears with three power shift speeds in each gear.

Massey Ferguson 2805 Dimensions

Wheelbase:	110 inches 279 cm
Length:	190 inches 482 cm
Width:	91.6 inches 232 cm (standard axle)
	125.7 inches 319 cm (long axle)
	156.9 inches 398 cm (extra-long axle)
Clearance (front axle):	25.4 inches 64 cm
Clearance (drawbar):	15.7 inches 39 cm
Rear axle:	3.75 inch diameter 95 mm
Front tread:	60 to 80 inches 152 to 203 cm
Front tread:	70 to 90 inches 177 to 228 cm (wide axle)
Rear tread:	71 to 92 inches 180 to 233 cm (standard)
Rear tread:	62 to 95 inches 157 to 241 cm (PAVT standard)
Rear tread:	71 to 126 inches 180 to 320 cm (long)
Rear tread:	62 to 129 inches 157 to 327 cm (PAVT long)
Rear tread:	71 to 161 inches 180 to 408 cm (extra-long)
Rear tread:	62 to 165 inches 157 to 419 cm (PAVT extra-long)

Massey Ferguson 2805 Weight
Shipping:	13500 lbs 6123 kg
Operating:	16035 lbs 7273 kg
Ballasted:	21430 lbs 9720 kg

Massey Ferguson 2805 Height
Steering wheel:	87.2 inches 221 cm
Hood:	72.9 inches 185 cm
Cab:	112.1 inches 284 cm

Massey Ferguson 2805 Tests

Nebraska Tractor Test 1258

Nebraska Tractor Test 1258
Diesel 24-speed 2WD October 7 – 13, 1977 Link: Nebraska Tractor Test 1258 file
PTO performance
Power at rated engine speed:	194.62 hp 145.1 kW
Fuel use:	13.3 gal/hour 50.3 l/hour
Power at rated PTO speed:	181.77 hp 135.5 kW
Fuel use:	11.2 gal/hour 42.4 l/hour
Drawbar performance
Max power:	157.98 hp 117.8 kW
Gear 5I used for power test.
Max pull:	17369 lbs 7878 kg
Gear 3I used for pull test.

Nebraska Tractor Test 1399

Nebraska Tractor Test 1399
Diesel 8-speed 2WD June 18, 1984 – June 24, 1981 Link: Nebraska Tractor Test 1399 file
PTO performance
Power at rated engine speed:	190.81 hp 142.3 kW
Fuel use:	13.0 gal/hour 49.2 l/hour
Power at rated PTO speed:	186.29 hp 138.9 kW
Fuel use:	11.2 gal/hour 42.4 l/hour
Drawbar performance
Max power:	160.48 hp 119.7 kW
Fuel use:	12.9 gal/hour 48.8 l/hour
Gear 5 used for power test.
Max pull:	17647 lbs 8004 kg
Gear 3 used for pull test.

FAQ

Is Massey Ferguson 2805 a good tractor?

The Massey Ferguson 2805 is one of the great tractors in the Massey Ferguson stable, and it has earned Massey Ferguson a fantastic reputation.

How much oil does a Massey Ferguson 2805 take?

Check out the Massey Ferguson 2805 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Massey Ferguson made the 2775

The Massey Ferguson 2805 was an agricultural tractor model made from 1978 – 1983