Massey Ferguson 5609 Utility tractor Specs & Features

Contents show

Massey Ferguson 5609 Utility tractor Technical Specifications

Massey Ferguson 5609 is a Row-Crop tractor that was produced by the John Deere between 2013 – .

Below you will find detailed technical specifications for Massey Ferguson 5609 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Massey Ferguson 5609 Production

Manufacturer:
Manufacturer:	Massey Ferguson
Type:	Utility tractor
Original price:	$74,659 (2014 )

Massey Ferguson 5609 Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	95
Battery volts:	12

Massey Ferguson 5609 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Final drives:

internal planetary

Differential lock:

full locking electro-hydraulic

Steering:

hydrostatic power

Brakes:

hydraulic wet disc

Trailer brakes:

pneumatic (optional)

hydraulic (optional)

Cab:

Cab standard with air-conditioning. Optional mechanical cab suspension. AGCOMMAND (optional)

Transmissions:

16-speed four-speed power shift with power shuttle

32-speed creeper

Hydraulics

Type:	open center
Pressure:	2900 psi 200.0 bar
Valves:	2 to 4
Pump flow:	15 gpm 56.8 lpm
	26 gpm 98.4 lpm (Twin Flow)

Tracktor Hitch

Rear Type:	II
Control:	electronic lower link draft control
Rear lift (at ends):	9480 lbs 4300 kg
Rear lift (at 24″/610mm):	7100 lbs 3220 kg
Front Hitch:	II (optional)
Front lift (at ends):	5500 lbs 2494 kg

Power Take-off (PTO)

Rear PTO:	independent
Clutch:	electro-hydraulic
Rear RPM:	540/540E (1.375)
	540/540E/1000 (1.375)
Engine RPM:	540@1920 540E@1964 1000@1560

Massey Ferguson 5609 Engine detail

Engine Detail
AGCO Power 33 AWI
turbocharged intercooled diesel
3-cylinder 12-valve
liquid-cooled
Displacement:	201 ci 3.3 L
Bore/Stroke:	4.25×4.72 inches 108 x 120 mm
Emissions:	Interim Tier IV
Emission control:	external exhaust gas recirculation (EGR) with diesel oxidation catalyst (DOC)
Power:	90 hp 67.1 kW
Maximum Power:	95 hp 70.8 kW
Fuel system:	high pressure common rail direct injection
Air cleaner:	dual stage dry
Pre-heating:	intake heater
Rated RPM:	2200
Idle RPM:	850-2402
Torque:	298 lb-ft 404.1 Nm
Torque RPM:	1600
Starter:	electric
Starter volts:	12
Oil capacity:	13.7 qts 13.0 L
Coolant capacity:	15.3 qts 14.5 L

Massey Ferguson 5609 Transmission overview

Engine Oil

Transmission:	Dyna-4
Type:	four-speed power shift with power shuttle
Gears:	16 forward and reverse
Clutch:	wet disc
Oil capacity:	68.7 qts 65.0 L

Massey Ferguson 5609 Dimensions

Wheelbase:	97.1 inches 246 cm
Length:	167.5 inches 425 cm
Width:	79.3 inches 201 cm (min)
Height (cab):	111.3 inches 282 cm
Ground clearance:	17.6 inches 44 cm
Rear axle:	Flange

Massey Ferguson 5609 Weight
	8426 lbs 3822 kg (2WD)
	8978 lbs 4072 kg (4WD)
Max capacity:	21500 lbs 9752 kg
2WD Max front axle:	6085 lbs 2760 kg
4WD Max front axle:	10500 lbs 4762 kg
Max rear axle:	11000 lbs 4989 kg

FAQ

Is Massey Ferguson 5609 a good tractor?

The Massey Ferguson 5609 is one of the great tractors in the Massey Ferguson stable, and it has earned Massey Ferguson a fantastic reputation.

How much oil does a Massey Ferguson 5609 take?

Check out the Massey Ferguson 5609 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Massey Ferguson made the 5609?

The Massey Ferguson 5609 was an agricultural tractor model made from 2013 –

How much can a Massey Ferguson 5609 Pull?

The max pulling capacity of the Massey Ferguson 5609 tractors starts at 7,654 lbs
3471 kg but may be slightly higher depending on the trim.