Massey Ferguson 5610 Utility tractor Technical Specifications
Massey Ferguson 5610 is a Row-Crop tractor that was produced by the John Deere between 2013 – .
Below you will find detailed technical specifications for Massey Ferguson 5610 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Massey Ferguson 5610 Production
Manufacturer: |
Manufacturer: |
Massey Ferguson
|
Type: |
Utility tractor
|
Original price: |
$77,499 (2014 )
|
Massey Ferguson 5610 Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Charging amps: |
95
|
Battery volts: |
12
|
Massey Ferguson 5610 Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD
|
Final drives: |
internal planetary
|
Differential lock: |
full locking electro-hydraulic
|
Steering: |
hydrostatic power
|
Brakes: |
hydraulic wet disc
|
Trailer brakes: |
pneumatic (optional)
|
|
hydraulic (optional)
|
Cab: |
Cab standard with air-conditioning. Optional mechanical cab suspension. AGCOMMAND (optional)
|
Transmissions: |
16-speed four-speed power shift with power shuttle
|
|
32-speed creeper
|
Hydraulics
Type: |
open center
|
Pressure: |
2900 psi 200.0 bar
|
Valves: |
2 to 4
|
Pump flow: |
15 gpm 56.8 lpm
|
|
26 gpm 98.4 lpm (Twin Flow)
|
Tracktor Hitch
Rear Type: |
II
|
Control: |
electronic lower link draft control
|
Rear lift (at ends): |
9480 lbs 4300 kg
|
Rear lift (at 24″/610mm): |
7100 lbs 3220 kg
|
Front Hitch: |
II (optional)
|
Front lift (at ends): |
5500 lbs 2494 kg
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
electro-hydraulic
|
Rear RPM: |
540/540E (1.375)
|
|
540/540E/1000 (1.375)
|
Engine RPM: |
540@1920 540E@1964 1000@1560
|
Massey Ferguson 5610 Engine detail
Engine Detail |
AGCO Power 33 AWI |
turbocharged intercooled diesel |
3-cylinder 12-valve |
liquid-cooled |
Displacement: |
201 ci 3.3 L
|
Bore/Stroke: |
4.25×4.72 inches 108 x 120 mm
|
Emissions: |
Interim Tier IV
|
Emission control: |
external exhaust gas recirculation (EGR) with diesel oxidation catalyst (DOC)
|
Power: |
100 hp 74.6 kW
|
Maximum Power: |
105 hp 78.3 kW
|
Fuel system: |
high pressure common rail direct injection
|
Air cleaner: |
dual stage dry
|
Pre-heating: |
intake heater
|
Rated RPM: |
2200
|
Idle RPM: |
850-2402
|
Torque: |
304 lb-ft 412.2 Nm
|
Torque RPM: |
1600
|
Starter: |
electric
|
Starter volts: |
12
|
Oil capacity: |
13.7 qts 13.0 L
|
Coolant capacity: |
15.3 qts 14.5 L
|
Engine Oil |
Massey Ferguson 5610 Transmission overview
Transmission: |
Dyna-4
|
Type: |
four-speed power shift with power shuttle
|
Gears: |
16 forward and reverse
|
Clutch: |
wet disc
|
Oil capacity: |
68.7 qts 65.0 L
|
Massey Ferguson 5610 Dimensions
Wheelbase: |
97.1 inches 246 cm
|
Length: |
167.5 inches 425 cm
|
Width: |
79.3 inches 201 cm (min)
|
Height (cab): |
111.3 inches 282 cm
|
Ground clearance: |
17.6 inches 44 cm
|
Rear axle: |
Flange
|
Massey Ferguson 5610 Weight |
|
8426 lbs 3822 kg (2WD)
|
|
8978 lbs 4072 kg (4WD)
|
Max capacity: |
21500 lbs 9752 kg
|
2WD Max front axle: |
6085 lbs 2760 kg
|
4WD Max front axle: |
10500 lbs 4762 kg
|
Max rear axle: |
11000 lbs 4989 kg
|
FAQ
Is Massey Ferguson 5610 a good tractor?
The Massey Ferguson 5610 is one of the great tractors in the Massey Ferguson stable, and it has earned Massey Ferguson a fantastic reputation.
How much oil does a Massey Ferguson 5610 take?
Check out the Massey Ferguson 5610 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Massey Ferguson made the 5609
The Massey Ferguson 5610 was an agricultural tractor model made from 2013 –
|