International Harvester 724 Utility tractor Specs & Features

Contents show

International Harvester 724 Utility tractor Technical Specifications

International Harvester 724 is a Row-Crop tractor that was produced by the John Deere between 1969 – 1974.

Below you will find detailed technical specifications for International Harvester 724 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

International Harvester 724 Production

Manufacturer:
Manufacturer:	International Harvester
Type:	Utility tractor
Factory:	Neuss, Germany

International Harvester 724 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Steering:

manual

Brakes:

dry disc

Cab:

Open operator station.

Transmissions:

8-speed

12-speed partial power shift

Hydraulics

Pump flow:

7.5 gpm
28.4 lpm

Tracktor Hitch

Rear Type:	II
Control:	position and draft control
Rear lift:	4520 lbs 2050 kg

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	540/1000

International Harvester 724 Engine detail

Engine Detail
International Harvester D-239
diesel
4-cylinder
liquid-cooled
Displacement:	238.65 ci 3.9 L
Bore/Stroke:	3.875×5.06 inches 98 x 129 mm
Power:	67 hp 50.0 kW
Fuel system:	direct injection
Compression:	16:1
Rated RPM:	2200
Idle RPM:	650-2420
Torque:	165 lb-ft 223.7 Nm
Torque RPM:	1600
Firing order:	1-3-4-2
Intake valve clearance:	0.010 inches 0.254 mm
Exhaust valve clearance:	0.012 inches 0.305 mm

International Harvester 724 Transmission overview

Engine Oil

Transmission:	partially synchronized
Gears:	8 forward and 4 reverse
Four gears (1-4) in high, low, and reverse ranges. Gear shifting is synchronized using the clutch. Tractor must be stoppped to shift range.

International Harvester 724 Dimensions

Wheelbase:	83.5 inches 212 cm
Length:	131.6 inches 334 cm
Width:	71.5 inches 181 cm
Height:	62 inches 157 cm
2WD Weight:	6262 lbs 2840 kg
4WD Weight:	6626 lbs 3005 kg
Ground clearance:	17.2 inches 43 cm
Front tread:	52 to 67.75 inches 132 to 172 cm
Rear tread:	57.5 to 73.5 inches 146 to 186 cm

FAQ

Is International Harvester 724 a good tractor?

The International Harvester 724 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.

How much oil does a International Harvester 724 take?

Check out the International Harvester 724 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year International Harvester made the 624

The International Harvester 724 was an agricultural tractor model made from 1969 – 1974