International Harvester 756 Technical Specifications
International Harvester 756 is a Row-Crop tractor that was produced by the John Deere between 1967 – 1983.
Below you will find detailed technical specifications for International Harvester 756 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester 756 Production
| Manufacturer: | |
| Manufacturer: | International Harvester |
| Factories: | Geelong, Australia |
| Rock Island, Illinois, USA | |
| Original price: | $8,300 (1971 ) |
| Production in the United States ended in 1971. In Australia, the 756 was in production until 1983. | |
| Engine: | |
| Drawbar (claimed): | 69 hp 51.5 kW |
| PTO (claimed): | 76 hp 56.7 kW |
| International Harvester 756 Engines | |
| Interntional Harvester 5.1L 6-cyl diesel | |
| International Harvester 4.8L 6-cyl gasoline | |
| Fuel tank: | 33 gal 124.9 L |
| Mechanical | |
| Chassis: | 4×2 2WD |
| 4×4 MFWD 4WD | |
| Steering: | power |
| Cab: | Open operator station. Cab optional. |
| Transmission: | 16-speed two-speed power shift |
| International Harvester 756 photos… |
| Hydraulics | |
| Type: | open center |
| Pump flow: | 12 gpm 45.4 lpm |
| Tractor hitch | |
| Rear Type: | II |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000 |
| Engine RPM: | 540@2100 1000@2100 |
| Dimensions & Tires | |
| Wheelbase: | 101 inches 256 cm |
| Weight: | 8400 lbs 3810 kg |
| Front tire: | 7.50-18 |
| Rear tire: | 18.4-30 |
| Full dimensions and tires … | |
| 756 Serial Numbers | |
| Location: | Clutch housing, left side. |
International Harvester 756 Mechanical
| Chassis: | 4×2 2WD | ||||||||||||||||||||||||||||||||||||||||||||||
| 4×4 MFWD 4WD | |||||||||||||||||||||||||||||||||||||||||||||||
| Steering: | power | ||||||||||||||||||||||||||||||||||||||||||||||
| Cab: | Open operator station. Cab optional. | ||||||||||||||||||||||||||||||||||||||||||||||
| Transmission: | 16-speed two-speed power shift | ||||||||||||||||||||||||||||||||||||||||||||||
Hydraulics
Tracktor Hitch
Power Take-off (PTO)
International Harvester 756 Engine detail
International Harvester 756 Dimensions
FAQIs International Harvester 756 a good tractor? The International Harvester 756 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation. How much oil does a International Harvester 756 take? Check out the International Harvester 756 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity. Do tractors have VIN numbers? Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body. What was the last year International Harvester made the 656 The International Harvester 756 was an agricultural tractor model made from 1967 – 1983 How much can a International Harvester 756 Pull? The max pulling capacity of the International Harvester 756 tractors starts at 16,365 lbs | |||||||||||||||||||||||||||||||||||||||||||||||