Massey Ferguson 690

Massey Ferguson 690 Utility tractor Technical Specifications

Massey Ferguson 690 is a Row-Crop tractor that was produced by the John Deere between 1983 – 1986.

Below you will find detailed technical specifications for Massey Ferguson 690 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Massey Ferguson 690 Production














Manufacturer:
Manufacturer: Massey Ferguson
Type: Utility tractor
Factory: Beauvais, France
Original price: $29,000 (1986)


Massey Ferguson 690 Power













Engine:
Engine: 80 hp
59.7 kW
PTO (claimed): 65 hp
48.5 kW
Drawbar (tested): 52.38 hp
39.1 kW
PTO (tested): 65.68 hp
49.0 kW

Massey Ferguson 690 Electrical










Ground: negative
Charging system: alternator
Battery volts: 12

Massey Ferguson 690 Mechanical































Chassis: 4×2 2WD
  4×4 MFWD 4WD
Final drives: outboard planetary
Differential lock: mechanical rear
Steering: power
Brakes: hydraulic wet disc
Cab: Cab standard with available air-conditioning.
Transmission: 12-speed

Hydraulics










Type: open center
Valves: 2
Total flow: 17 gpm
64.3 lpm

Tracktor Hitch










Rear Type: II
Control: position and draft control
Rear lift (at 24″/610mm): 4130 lbs
1873 kg

Power Take-off (PTO)







Rear PTO: independent
Rear RPM: 540/1000

Massey Ferguson 690 Engine detail








































Engine Detail
Perkins AD4.248
diesel
4-cylinder
liquid-cooled
Displacement: 248 ci
4.1 L
Bore/Stroke: 3.975×5.00 inches
101 x 127 mm
Power: 80 hp
59.7 kW
Fuel system: direct injection
Air cleaner: dual paper elements
Compression: 16:1
Rated RPM: 2200
Torque: 220.5 lb-ft
299.0 Nm
Torque RPM: 1380
Starter volts: 12



Massey Ferguson 690 Transmission overview

Engine Oil








Gears: 12 forward and 4 reverse
Clutch: 304mm dry disc
Three gears (1-3), plus reverse gear, in two ranges with additional two-range speedshift. Gears 2-3 and the speedshift are synchronized.

Massey Ferguson 690 Dimensions




























Wheelbase: 90 inches
228 cm
Length: 154 inches
391 cm
Width: 81 inches
205 cm
Operating weight: 8,020 lbs
3637 kg
Ballasted weight: 10,295 lbs
4669 kg
Rear axle: Flange
2WD Front tread: 54 to 70 inches
137 to 177 cm
4WD Front tread: 63 to 71 inches
160 to 180 cm
Rear tread: 60 to 94 inches
152 to 238 cm

Massey Ferguson 690 Tests

Nebraska Tractor Test 1539













































Nebraska Tractor Test 1539
Diesel 12-speed 4WD
September 14 – 25, 1984
Link: Nebraska Tractor Test 1539 file
PTO performance
Power at rated engine speed: 65.68 hp
49.0 kW
Fuel use: 4.5 gal/hour
17.0 l/hour
Power at rated PTO speed: 62.25 hp
46.4 kW
Fuel use: 4.0 gal/hour
15.1 l/hour
Drawbar performance
Max power: 52.38 hp
39.1 kW
Fuel use: 4.4 gal/hour
16.7 l/hour
Gear 7 used for power test.
Max pull: 7,650 lbs
3470 kg
Gear 1LH used for pull test.

FAQ

Is Massey Ferguson 690 a good tractor?

The Massey Ferguson 690 is one of the great tractors in the Massey Ferguson stable, and it has earned Massey Ferguson a fantastic reputation.

How much oil does a Massey Ferguson 690 take?

Check out the Massey Ferguson 690 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Massey Ferguson made the 670

The Massey Ferguson 690 was an agricultural tractor model made from 1983 – 1986

Leave a Comment